KCB series of large flow gear

● Use KCB series gear pump is suitable for high-volume delivery of solid particles and fibers, non-corrosive, temperature no higher than 80 ℃, viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) of oil or other liquid lubricant of similar nature. ● Applications can be used in the oil transfer system, booster pump; can be used in the fuel system, transmission, compression, fuel injection pump; in the hydraulic system used to provide hydraulic power hydraulic pump; in all industrial areas, can for lubricating oil pump; ● structural features This series of gear pumps are gear, shaft, pump, valve, shaft seal formed. Gear heat treatment with high hardness and strength, and the shaft is installed with operating in a replaceable bushings. All parts of the pump are lubricated by the output medium when the pump work automatically to. There are well-designed pump drain and return tank, gear to withstand the torque force at work in the smallest, so bearing loads of small abrasion, high pump efficiency. Pump has a safety valve as overload protection, safety valve total reflux exclude pressure pump rated pressure of 1.5 times, it can also be discharged adjusted according to actual needs additional pressure range allowed. But note that the safety valve relief valve can not be long-term work, when necessary, be installed in the pipeline. Overhang from the spindle end of the pump to see, for the clockwise rotation. ● Performance Parameters Model Diameter (mm) Flow (l / min) discharge pressure (MPa) Suction Head (m) Power (KW) KCB-18.3 2CY-1.1 / 14.5-2 3/4 18.3 1.45 5 1.5 KCB-33.3 2CY -2 / 14.5-2 3/4 33.3 1.45 5 2.2 KCB-55 2CY-3.3 / 3.3-2 1 "55 0.33 5 1.5 KCB-83.5 2CY-5 / 3.5-2 1" 55 0.33 5 2.2 KCB-83.3 2CY- 5 / 5-2 1 1/2 "83.3 0.33 5 2.2 KCB-200 2CY-8 / 3.3-2 1 1/2" 83.3 0.33 5 3 KCB-200 2CY-12 / 1.3-22 2 "200 0.33 5 4 KCB -200 2CY-12 / 3.3-2 2 "200 0.33 5 4 KCB-200 2CY-12 / 6-2 2" 200 0.33 5 5.5 KCB-200 2CY-18 / 10-2 2 "200 0.33 5 5.5 KCB-200 2CY-18 / 3.6-2 2 1/2 "200 0.33 5 7.5