Shanghai / Shandong / Beijing including computer software micro hardness tester

This series of automatic measuring microhardness CCD camera interface will be connected via micro hardness tester and computer, the whole testing process through a simple keyboard and mouse to complete. Measurement and control of this system through high-resolution imaging devices and computer software to complete, CCD automatic measurement of microhardness increased speed and flexibility testing, eliminating the human operational error eyepiece system that can meet a variety of significant micro hardness testing requirements. Scope of the heat treatment, carbide, hardened layer, the surface coating, steels, non-ferrous metal, micro and thin shaped components. CCD automatic measurement of microhardness HVS-1000 uses computer software programming, optical measurement systems. Enter through the soft option of Vickers and Knoop hardness measurement, measure the strength of the light can be adjusted, can choose dwell time, the LCD screen can display test method, test force, by measuring the indentation on the panel input diagonal length of the screen directly reads out the hardness value, simple look-up table cumbersome. Easy to use, high accuracy. HVS-1000 digital micro hardness tester for the determination of small, thin, surface coating specimen infiltration Vickers hardness and determination of glass, ceramic, agate, precious stones and other man-made hard but brittle material of the Knoop hardness. CCD automatic measurement of microhardness scientific research institutions, enterprises and quality inspection departments to research and test the ideal hardness testing equipment. HVS-1000 Vickers hardness tester technical parameters: Test force 10g (0.098N), 25g (0.245N), 50g (0.49N), 100g (0.98N), 200g (1.96N), 300g (2.94N), 500g ( 4.9N), 1000g (9.8N) minimum measurement unit 0.5μm total magnification 100X (observation) 400X (measured) Automatic loading (loading, dwell, unloading) Instrument Size 405 × 290 × 480mm (length × width × height, LXWXH) Instrument Weight 25kg Maximum specimen height 65mm Power AC220V ± 5%, 50 ~ 60Hz implementation of standards GB / T4340.2 national standard verification procedures JJG151 XY test table size: 100 × 100 mm Maximum movement: 25 × 25mm standard Fittings for objective 40x, 10x, micro's indenter, measuring eyepiece 10x, standard hardness block (2), thin-shaped test units, cylinder test sets, flat oral Taiwan, level meter, power lines, auxiliary tools