Vacuum cleaner oil sampler

Technical parameters: Material: LC super-hard alloy brand: Pooler / PULL volume: 250ml Pressure: 2KPa Executive Standard: GBT 17489 hose: NAS 1638 0 of magnitude can be customized cleaning bottles: NAS 1638 0 matching of orders of magnitude can be customized: Oil pollution can be equipped with various global sampling, particle detection sampling, sampling cleanliness analysis, oil monitoring sample, oil analysis sampling, routine sampling. Ancillary equipment: particle counter particle counter particle counting system fluid particle size analyzer Operation: 1, the first oil gun to the top of the circle round nut loosen, then tighten the nut through the hose after the gun joints and soft fixed oils tube. Hoses should extend oil gun fitting the lower 20cm, in order to avoid oil gun oil gun inside the joint and into the oil pollution. 2,250ml cleaning fluid bottle is screwed onto the oil gun fitting pumping operations can be carried out. Under normal circumstances, the hose extending into a depth of about 50mm. Thus, to avoid inhaling deposits. 3, the oil gun handle to push in the end, while the oil gun handle pulled back, it will create a vacuum inside the oil bottle, the oil flowing into the oil bottle along the hose. Clean 250ml bottle about 15 times repeatedly drawing can be pumped full 250ml sample bottles. 4, the oil pump to the oil bottle 200ml mark, but do not make pumping oil bottles filled with oil. 5, from the oil gun fitting unscrew the oil clean vial, fitted inside the cover, pay attention to avoid the mixing of dust, foreign particles. Then tighten the cap. 6. Loosen the round nut, extracted from the nut of the hose. Clean the hose can not be used repeatedly. 7, received a good sampler that end. Specific details, please call consultation Provincetown Imperial Chinese Service Center! The event interpretation Provincetown Timor Global Chinese Service Center for all!