Crossed platform

And bracket mounting platform 1. The platform stand by position requires lifting put in place, adjust the level of fixed bolt, the real requirements of each leg must pad, then tighten the anchor bolts. 2. fixed platform bracket adjustment has been completed, with a crane to the number corresponding to the platform and stand steady lift, slowly place to stand on the platform, with four equal length sling suspended from the ceiling, to ensure that the level of the platform when lifting. 3. Place the platform to stand on the platform, and then adjust the length and width of the platform and stand, left-aligned, threaded hole pupil inspection platform and stand on the positive, with M24x80 bolts gently twist on a few buttons, do not tighten, Then the then M27x100 bolts installed throughout the platform all the bolts and adjusting bolts installed, and do not tighten. Bolts and adjusting bolt assembly according to claim 4 platforms all in place, the next platform should handle the work surface is coated with butter, with diesel or petrol after dry cleaning and preparation level, and square levels, by experienced machine repair people slowly adjust, flatness adjustment reached a plateau of the requirement. When adjusting the fastening bolts can not be tightened, and then adjust the level tightened.