Sun and color fastness testing machine Q-SUN

The scope of application: for textiles, paints, dyes, paints, rubber, plastics, wood, paper and other materials, flooring and light fastness, weather fastness, light perspiration color fastness and aging test. [Standards]: AATCC TM 16, AATCC 169, ISO105 B02, ISO105 B04, GB / T8427, GB / T8430 and the like. 【Technical Parameters: 1, light source: air-cooled long arc xenon lamp. 2, lamp power: 1800W. 3, Q-SUN xenon lamp can be the most realistic simulation of the solar spectrum, including ultraviolet, visible and infrared. In the whole spectral range to test color fastness test is necessary. 4, double the sample specimen drive structure, large sample size, contains 32 sample holder; Sample area 2300cm2, can be carried out more than 200 samples tested simultaneously. 5, the patent system can precisely monitor Solar Eye irradiance, irradiance automatically maintain the set, dual monitor TUV (300 ~ 400nm) and 420nm wavelength. AuToCal patent system using special CR20 calibration radiometer to measure the light intensity of the lamp, the data signals transmitted directly to the controller. Precise, time-consuming short, simple operation. 6, Solar Eye (Solar Eye) system to monitor energy change at any time and be compensated, so that the test in the pre-set energy (standard light) is carried out; irradiance output range: 0.20 to 1.25 W / m . 7, can always monitor the sample surface temperature changes will be compensated, to ensure consistent sample surface temperature was drying; black standard temperature range: 35 ℃ -125 ℃ / light cycle; 25 ℃ -45 ℃ / dark cycle. 8, ready to monitor changes in humidity and be compensated to ensure the accuracy and reproducibility of the experiment; humidity control range: 20% -70%. 9, ready to monitor changes in temperature test box and give compensation to ensure stable ambient temperature test box. 10, microprocessor control, can be set to control the display of test data, such as: temperature, board temperature, relative humidity, radiometric data, and automatic operation can be pre-set standard test method, the operator can use the program settings . 11, the experimental data are available online through the data output line to the external computer on file by editing software for user analysis. 12, LCD interface can be edited on the test program storage, the control panel can continuously display the progress of the case and trial. 13, you can monitor the status and operation of all systems, self-diagnostic error checking; and with the implementation of Security reminder routine maintenance or necessary to close the program information 14, Origin: United States imported