Screw shields sewn

In addition to the screw guard outside, round shields sewn organ type can also be used for screw, light bars, columns, spindles and other circular rotating cylinder for protection. It is sewn together by the stamping out of the wafer, within two adjacent sides, two outside stitched together by sewing firm can achieve better dimensional stability and the horizontal direction. It can be used to shield a small volume of debris, and can withstand the weight of the debris generated. If you need to water and oil, can be coated with waterproof membrane in the sewing department. It can be used horizontally or vertically, when the level of the use of general use plastic or aluminum support ring, holding the shroud and screw directly to a certain uniform distance and prolong life. You can add a metal ring in each of the flap in drawing large length, improve the stability of the shroud. Connection or fixed end commonly used metal flange can also choose cuff style. Selection of such shields is important to note that the shroud around the screw diameter than the inner diameter of 10 mm.