Supply pellet feed dryer

It is slightly inclined and able rotating cylindrical body into the wet material from the upper end of the dry material was collected from the bottom of the other side. Hot air from the feed end or the discharge end enter discharged from the other end of the upper portion. Barrel containing forward copy board, so that the material in the cylinder during the rotation and shed constantly took to full contact with the hot gas, in order to improve the efficiency of drying and material moving forward. Dry material source is usually hot air, high temperature flue gas. Can be selected according to the nature of the specific quality requirements of materials and so on. Second, the performance characteristics of the water evaporation capacity of the dryer drum is usually 30-80kg / m3 h;? With the increase of air temperature and improve, and with the nature of the material moisture changes. Thermal efficiency is generally 40% -70%. Equipment running smoothly and reliably, no wearing parts, less failure, long service life and is widely used in various drying industry. Third, the scope 1, from the raw material form, centrifugal dehydration cake, filter press cake; can be dried free flowing powder, granules, flakes, fibers and other materials. 2, from the scope of application of materials, widely used in building materials, quartz sand, iron, phosphate rock, chemical products (cement), fertilizer, fertilizer, organic powder, feed, wine tank, spray bran, dried starch residue, corn residue, bean dregs like Marc. Fourth, the product features: 1, continuous operation, large production capacity; 2, hot air through the barrel resistance, low energy consumption; 3, operating flexibility, strong adaptability of the materials; 4, smooth operation, less failure, maintenance low-cost, long life; 5, by increasing the rapping, break up the device can be adapted to a viscous material.