How much of a dryer

Works and Scope: Division I is the first to use three rotary drum drying gypsum business, the equipment than conventional rotary drum dryer energy saving one-third, greatly reduce production costs, the technology in China leading level, it works as follows: gypsum from the feeding device into the inner three-cylinder, to achieve downstream drying, gypsum board in the inner constantly took a copy, scattered spiral traveling type heat exchange, Bill moved to the other end of the inner layer into the middle, countercurrent drying, the material is repeated constantly in the middle Yang Jin, was a step back two steps forward travel mode, both fully absorb the material in the middle inner cylinder the heat, and heat absorption middle of the drum, and prolong the drying time, the best material in this dry state. Materials other end of the line to the middle and fall into the outer, material in the outer drum rectangular multi-loop approach road, the effect of material to dry under the hot air discharge action fast marching drum, no effect of the wet material to dry weight and not due to rapid travel, material within this rectangle copy board is fully dried, so as to achieve drying effect, complete the drying process. The device is suitable for drying gypsum, fly ash and other materials. Second, gypsum dryer Main features: 1, strong anti-overload dryer, large capacity, low fuel consumption, low drying costs; 2, used downstream drying method, hot air and wet material from the same side into the dryer , you can use hot air to obtain a high evaporation intensity, dryer outlet temperature is low, high thermal efficiency; 3, operating parameters can be changed depending on the nature of the material, the material in the dryer cylinder body can form a stable full cut fabric curtain, quality heat exchange more fully; 4, the new feeding, nesting devices, put an end to the drum dryer feed blockage, discontinuous, uneven, and returning materials such phenomena, reducing the load on the dust removal system; 5, dryer to achieve a " zero level thrust ", greatly reducing wear riding wheel block, cylinder smooth and reliable operation; 6, drying machine," aligning roller-type device ", the mating roller and rolling ring forever linear contact and thus greatly reduce the wear and power loss; 7, moisture control products based on user requirements