Hebei professional production of 2D-SY100-130MPa electric test pump manufacturers in what?

2D-SY50 / 100,2D-SY40 / 130 electric test pump, transmission parts with horizontal cycloid reducer, and then by the eccentric shaft slide mechanism, driven crosshead reciprocate in a horizontal slide, driving the plunger liquid cylinder reciprocating motion to discharge high-pressure liquid. Entire pump section disposed above the tank, and the tank cover fixed base unit with Sarkozy, and home installation, in order to facilitate disassembly cylinder portion wearing parts and other maintenance tasks, so that the overall structure is compact, elegant appearance . Cylinder pressure test is a key component of the pump, the plunger and valve line deputy of two parts. Wherein the plunger seal sleeve, valves and valve sleeve for critical parts and wear parts, they complement each other even as the members. The ultrahigh-pressure test pump reciprocating pump, not only UHP performance. More importantly, the safety and reliability in the ultra-high pressure work. To this end, two-cylinder discharge pressure of the liquid through the collector pipe into the catchment body, above the central catchment safety valve body, which turned the factory calibration pressure 1.1-1.2 times the rated working pressure, the top rear of the body is provided with a discharge catchment pressure valve for emergency relief, but not as subjects with a relief vessel. Also in the upper catchment before the body is equipped with a pressure gauge to show, in order to prevent the impact of the lower part of the pulsating pressure of the pump depends on the table read, the table has a damping device.