jyq-06 Handan steel template

Operation points steel template: Clean the concrete surface, and to cutting hair, according to the design size, stand first layer template support, inspection, calibration, make sure the template geometry accurate, reliable connection, the central pair. After the check, the basic section coagulation perfusion, filling a savings section. Stent platform, installation lifting frame. Cleaning, chiseling concrete surface, welding, steel banding pier body, the last infusion chiseling concrete surface to facilitate the connection of new concrete, long enough length of welding steel and broken concrete cutting hair to be washed away after the case. Chaimo: Chaimo person standing on the hanger, up and down, inside and outside each one with each other, to pull Unscrew the nut, followed by removal of the tripod (and installed in reverse order), while lifting the top edge Chaimo mix in the upper template tripod on standby, since the last branch established template layer Start, each block with a small crowbar demolition template, hanging onto the upper scaffolding. Stretch chiseled head, then use the same grade cement mortar plugging holes, and wipe the surface with concrete puree, the color and consistency of concrete pier easily. Curing adhesive plastic film using immersion conservation, and will work the bottom frame and a safety net in order to enhance a template height, hung on the middle template. Refurbishment template: Remove the template timely refurbishment soil level and if the construction smashing warped template "tongue." Clear plate surface residual concrete, and brush the release agent. More on the bridge template, Handan steel template information, please visit http://www.jyqgjg.com/