jyq-04 Handan steel template

Construction steel template: lifting frame. Lifting frame is normally provided by upper and lower beams (or single beam) and consisting of two columns door type rigid frame, Form System is the main load-bearing structure, the use of steel welded together. Enhance the pier wall erected around the mandrel (climbing pole) with the use, usually a ram on each set should be a lifting frame (there are a few acts while lifting frame ram). Lifting frame width, length, thickness of the wall from the pier and the inner and outer mold of high and thick decision. Inside and outside the template. Multi-use template 1.5 ~ 2mm thick steel sheet production, about 1.0 ~ 1.5m on angles, each width 0.3 ~ 0.6m. Available pier body bolted into the desired shape. Fixed income sub-slope piers template template template and activities, stationary platen mounted on the lateral inside and outside the ring beam roof rack or stand upright, and the activity template will be installed between the template and post mold adjustment screw to move the template position to achieve change The purpose of the pier wall thickness. Slide template to the wall thickness of the same slope hollow pier, its internal and external template remains fixed in the column, but the top shelf or stand suspended by rollers radiation beam can be used to adjust the diameter screw top or stand movement, to regulate piers Objective slope. More on the bridge template, Handan steel template information, please visit http://www.jyqgjg.com/