Aerated block device, the latest offer _ _ aerated block device ASAP Heavy professional manufacturer

Standard configuration Four: For annual 150,000 cubic meters of aerated block equipment production lines, six φ2 × 31m autoclave, a 6-ton boiler can produce. (Annual legitimate and required kinetic energy is moderate, medium-tonnage required) Standard configuration V: For annual 200,000 cubic meters of aerated block equipment production lines, six Φ2.68 × 31.5m autoclave, an 8-ton boiler that is produce. (Annual production of large, kinetic energy required is large, large tonnages required) Standard configuration VI: For annual 300,000 cubic meters of aerated block production line equipment aerated block device, eight Φ2.68 × 31.5m autoclave, three 4 tons of boiler can be produced. (Annual production of large, kinetic energy required huge, large tonnage can be) more than six configuration to meet the different needs of about aerated concrete equipment, aerated block device manufacturers use the latest offer, for aerated block production line equipment different production, If the boiler with too big, not only makes it useless, but also a waste of resources aerated block equipment and technical guidance, not more effectively improve efficiency and investment costs, so the tonnage for boiler configuration, suitable to aerated block device Preferred, as long as meet the demand. (5) Set construction beams in the span or the height of a large wall. Usually when the wall is longer than 5m, can be set in the middle of reinforced concrete construction column; when the wall height of more than 3m (≤120 thick walls) or 4m (≥180 thick walls), can be added back at the high school in the wall of reinforced concrete beam waist . (6) between the window sill and wall junction is stress concentration sites vulnerable to contraction of masonry cracks, therefore, should be cast with reinforced concrete to resist deformation at the windowsill. The upper corner of the door and window openings are also prone to cracks and hollowing, where appropriate to replace the ring beam lintel. Uneven parts (such as moldings, rain cover, a canopy, window sills, etc.) (7) Aerated concrete facades horizontal wall should be done and the drip pan of water to avoid stagnant water. Aerated block device, the latest offer _ _ aerated block device ASAP Heavy professional manufacturer provided by ASAP Heavy Industry. If you have any questions about this information or advice, please contact us now! Our Company Name: Henan ASAP Heavy Industry Co., Ltd (www.hnxjzg.cn) Contact: Dan Weifeng, or click on "Commercial Union Support" direct dialogue with us!