Aerated block device of choice, aerated block device, ASAP Heavy professional manufacturer

Steam-cured products become the current darling of the market, but steamed raise any natural product is the object of a lot of people are concerned, because the temptation of its cost than steam curing product investment smaller, Henan ASAP Heavy steam-free block equipment, aerated block device leading technology, ASAP's technical staff told you steam-cured and autoclaved aerated block device major difference in what? First, the raw material difference. Steam-cured and autoclaved aerated block device material is essentially no difference, but for the ratio and the amount of the main differences, mainly steam curing fly ash as the main raw material, free of the steam-cured You can use more raw materials such as sand and tailings and so on. Second, the production process of the difference. Aerated block device production process does not require cutting and aerated block device, the latest offer, under normal circumstances can be carried out at room temperature, production, production line capacity is mainly dependent on the number of mold aerated block device video, due to the large parts are manually operated, high breakage rate of the product; autoclaved aerated block device type cut by a cutting machine to ensure product quality, while at high temperature and pressure conditions of steam curing is a kind of product quality promotion. (10) strictly control the moisture content of aerated concrete block masonry on the wall when. Accordance with the relevant rules of specification, the moisture content of aerated concrete block construction time should be less than 15%, for fly ash aerated concrete products should be less than 20%. Aerated concrete drying shrinkage law shows that the moisture content of between 10 to 30% shrinkage is relatively small (typically 0.02 ~ 0.1mm / m). Based on experience, the construction of aerated concrete block moisture control in 10 to 15% is more appropriate aerated block device, block water depth of 8 ~ 10mm suitable surface, surface water depth or by knocking on a small Knife while observing the law of aerated block device of choice, judging by the experience. Under normal circumstances in the masonry before 24h watering, watering should be based on current construction season and wet temperatures determined by the surface moisture control. Prohibits the direct use of full blocks excess rain or watering. Aerated block device of choice, aerated block device, ASAP Heavy professional manufacturer provided by ASAP Heavy Industry. If you have any questions about this information or advice, please contact us now! Our Company Name: Henan ASAP Heavy Industry Co., Ltd (www.hnxjzg.cn) Contact: Dan Weifeng, or click on "Commercial Union Support" direct dialogue with us!