AK49 Excelle car matching equipment matching instrument

AK49 Excelle matching scanner supports OBD, functional set two buttons "M1" and "M2", "M1" is the key matching function keys, "M2" is matching the remote control function keys. (You can do die repair T300 new Excelle) 1. Match chip key: Use the "M1" key to select the number you want to match (at least two matches, match up to 5). For example: You want to match three chip keys, with the first of a new key to open the ignition. After using the "M1" select 3, press "M1" 3 seconds after release "M1", the instrument "H3" quick flashes; etc. "H3" becomes "H2" and stops flashing, the first to pull out The second key is inserted into the ignition key and open to the press "M1" look, "H2" flashes quickly; etc. "H2" becomes "H1" and stops blinking, remove the key and then insert the chip key to open the third ignition, press "H1" look, "H1" flashing rapidly; etc. "H1" becomes "H0" time, turn off the ignition. Do it with the last this key the following actions: - off - on - off - on - off, (Note: Every time the ignition must wait two seconds, also must wait two seconds off), and finally remove the key more than 2 seconds, etc. matching complete key. (Must use new, never been used 48 chips, or match can not be successfully) 2. matching remote control: Match at least one up to four matches. Use the "M2" button to select the number you want to match the remote control. For example: you need to match two remote control, the use of "M2" select "A2", press and hold the "M2" 3 seconds after the release, "A2" flashes rapidly after 30 seconds the instrument will "drop" sound prompts you to press first remote control (the remote control while holding down the "lock" and "open" button one second, one second release, etc; continuous press, put the remote control "lock" to "On" button three times, and finally press the "start" button 1 second after the opening), then the instrument will "drop" sound, the instrument displays "A1" and flashes, and so the next time the instrument prompts "drip" sound, prompting you to press the second remote control (the same step with the first remote control ). After stops flashing and other equipment, remote control has been completed match