Shouban model polished surface treatment process of the appearance of the structure Hand

Appearance and structure into palm palm palm, we are here to give you explain the color appearance Shouban surface treatment requirements. General appearance of the product, the surface treatment to keep the finished product as close as possible, in order examine the appearance of results. Common treatment have polished appearance, Gray, polishing, color, screen printing, flocking plating, laser carving and too high UV light and so on. Hand sanding, the process is essentially a prototype product must pass through a part of CNC machine tools after machined down, the surface will be with a lot of glitches, this kind of marks. These machines can not be avoided. Then you need to manually get rid of these artificial defects. Generally, we are sanding or polishing paste for polishing. This period may also use some spray to detect the effect of the ash handling and quality of manual polishing. Polished, the first is the need to use very coarse sandpaper rough polished. Then after removing the fine lines of the polished surface layer of very thick burr. Sandpaper can be divided into 800,1000,2000 etc. varying thickness levels. Depending on the product requirements of different degree of surface polish! After a grinding is completed, by spraying a layer of putty, you can zoom in roughness of the surface of the product. In order to be able to achieve with the naked eye you can see the extent of defects. Then we can have a focused partial correction, until a final product of the grinding process to complete all!