Gray rust-proof paint manufacturers to reconcile

Characteristics of good adhesion, high rust resistance, water resistance, fast drying at room temperature naturally. Use mainly for machinery and equipment, steel structures, pipelines. Divided into physical and chemical rust two categories. Chemical rust inhibiting action against the former with appropriate pigments and paints, to form a dense film to prevent the intrusion of corrosive substances, such as iron oxide red, aluminum, graphite, rust and other latter by anti-rust paint, such as red lead 1, air spray, brush can be [1]. 2, the substrate treatment before use should be clean and free of oil, dust, rust, etc. 3, X-6 can be used to adjust the viscosity alkyd thinner. 4, spray paint, if the gloss is too high, must use 120 sandpaper or previous track even after the paint is dry, before the hard work for construction. 5, iron red rust, can not be applied directly to the zinc, aluminum substrates, and poor weather alone, should topcoats. 5.Reference 1, air spray, brush can be. 2, the substrate treatment before use should be clean and free of oil, dust, rust, etc. 3, X-6 can be used to adjust the viscosity alkyd thinner. 4, spray paint, if the gloss is too high, must use 120 sandpaper or previous track even after the paint is dry, before the hard work for construction. 5, red lead rust, can not be applied directly to the zinc, aluminum substrates, and poor weather alone, should topcoats. Note the new wall must be a period of time, allowed to fully dry, so that the moisture content of less than 10%, before construction ph value of less than 10. Usually at 25 ℃, relative humidity of 65%, the cement wall should be dry for more than 60 days. Store in a cool, dry, well-ventilated place, the temperature should not than 0 ℃. Zinc yellow rust and so on. Antirust bridges, ships, pipelines and other metals.