Qingdao ground ash from the sand from the ground floor, Qingdao, Shandong ground curing agent curing agent

Wanxin resistant floor plate curing agent (or called concrete health liquid) is water-based compound solution utilizing German technology and the entire process of production of an organic polymer composite materials and synthetic inorganic alkali metal salts, is a non- toxic, VOC completely zero, with a professional solution nanoscale chemical active substances, are pure green of new building materials. I produced the curing agent after spraying resistant floor or concrete surface covering not only the rapid formation of a thin film on the surface, while the concrete shallow free calcium and magnesium ions in the permeable layer to form a dense, hard surface, together delaying the rapid evaporation of moisture in concrete, making full use of concrete cement particles in the hydration reaction itself moisture resistant floor so as to achieve the purpose of self-support. Scope: 1, for a variety of cement-based wear-resistant floor; 2, applies to the concrete nature of the road, the airport, chimneys, cooling towers, factories, buildings, tunnels, docks, squares and many other concrete works and cement products. Features: 1, this product is milky white liquid, non-toxic, odorless, VOC zero pure green materials; 2, not only the surface of a film, but also serve to increase penetrate the concrete surface compactness, compressive strength, hardness and durability; 3, products containing nanoscale polymer particles, surface brightness enhancement resistant floor or concrete products, and enhance the perception of good visual effects; 4, inhibition of plastic shrinkage of concrete, reducing the concrete surface cracks; 5, Construction is simple, with less, can replace the grass bag cover or water conservation, significant savings in manpower, material and other maintenance costs, reduce the cost of construction costs. 6, greatly reducing the waste of resources and environmental protection. Usage: 1, after the close pulp concrete forming (resistant floor after calendering), surface water, no bleeding, no prints pressed gently with your fingers, then using spray, roller or brush (spray best recommendation), etc. way construction, conservation agents require the construction uniform, complete; 2, the use of a spray nozzle from the concrete surface 30CM appropriate; 3, after the first pass sprayed concrete forming, curing agent to be sprayed on the base film and then the vertical direction two times (summer about 20min, winter about 1h). 4, this product is 20kg plastic drum, the normal 600 square meters-800 square meters can be sprayed conservation, the actual construction area of ??need construction unit based on the effect of the construction environment and construction requirements. 5, the product must be at least 5 ℃ construction, or affect the construction effect. Note: ◆ no special water-rich cement concrete with caution. ◆ After construction is completed before the film should be avoided rainfall, the case of rainfall to be re-construction. ◆ not interrupt traffic construction environment, sand and dust should be cleaned before construction. ◆ immediately after construction cleaning equipment and tools, to prevent clogging of the nozzle, pipe. ◆ use, prohibiting contact with skin and eyes, or should quickly rinse with water or medical attention.