Supply Beijing flocculant factory

 Supply Beijing flocculant manufacturers Manufacturers factory specializing in the production, welcome to visit the office 010-57193076-- phone 13436502885-- fax 010-80570010-- qq457423671 Guoshao Jun water company network http://www.bjsbqhb.com Beijing Environmental Protection Technology Co. Biqing offer free samples, technical support, service tracking, your satisfaction, my pleasure ......... flocculant performance and uses: 1, the product adaptation source of water, a wide range of PH adapt. When coagulation with less, floc formation rapid sedimentation rate is high, precipitation may shorten the reaction time and increase processing power. 2, water purification effect is 5-8 times that of aluminum sulfate, ferric chloride is 3-5 times more than ferrous sulfate and alum. This product is dissolved quickly, little resistance. Low molecular purifying agent can save money than 30-70% 3, the product can remove the water source of iron, manganese, arsenic, fluoride, beryllium, chromium, etc., on the removal of radioactive contamination in water and organic pigments, some good results. Can be used for sludge dewatering, is refractory and ceramic binder. 4, recyclable waste glycerol oleic acid (50% recovery), can be used for cement accelerator. New sizing precipitant for precision casting, industrial hardener, paper industry. Can handle a variety of industrial wastewater purification, and good results. A, tannery wastewater removal electrolysis coagulation FDA: SS97%, 95% color, sulfides 90.2%, chromium 94.8%, COD75%. FDA dyeing wastewater treatment, good color removal. In the aeration tank treatment effect: COD80 ~ 90%. B, tailings overflow red water treatment dosage of this product is five ten thousandths, the removal rate of 96.6 to 99.8% purified water can be directly reused. Manganese smelting blast furnace gas washing wastewater treatment using this low dosage, low-cost, one-tenth of aluminum sulfate. C, the FDA papermaking wastewater treatment, color can be reduced by 7 to 10 times, COD reduced by 50 to 80%, with the exception of aluminum, chromium 90%, in addition to cyanide 33%, in addition to phenol from 1.5 to 6.8 percent, the dosage of 100PPM about. FDA beryllium-containing waste water treatment, the removal rate of 90%. D, heavy metals smelting and processing wastewater treatment with this product, in addition to 97% aluminum, arsenic removal rate of 83%, 20% or more fluoride. The fluorine-containing 20% ??or more. Leaded glass + polyvinyl chloride-dimensional filtered and treated with PAC, the removal rate of up to 95%. Silver wash with PVC plastic waste processing, you can meet emission standards.