Where PEEK-1000 board

 PEEK-1000 (brownish gray) PEEK-1000 using pure polyether ether ketone resin as a raw material, in all PEEK level best toughness, impact best. PEEK-1000 can use the most convenient way for disinfection sterilization (steam, dry heat, ethanol, and Y-rays), and the manufacture of PEEK-1000 raw ingredients comply with the EU and the US FDA hard and fast rules about food, these features make it suitable for medical , pharmaceutical and food processing industry has been very widely used. The main features of the air, the maximum allowable operating temperature is very high (260 degrees can continue to work, short-term up to 310 degrees), high mechanical strength, stiffness and hardness, high temperature, excellent chemical resistance and hydrolysis resistance, excellent wear and friction performance, high creep strength, excellent dimensional stability, excellent UV resistance, excellent resistance to high-energy radiation, the inherent low flammability, and produce less smoke when burned. Performance parameters experimental nature of the nature of the test standard data standard data density ISO1183 1.32g / cm3 volume resistivity VD0303 4.9 * 1016xcm DIN53495 0.5% water absorption surface resistance VDE0303 ≥1015 chemical resistance ?? - dielectric constant 1MHz DIN53483 3.2 continuous use temperature ?? -40 ~ 260C dielectric loss factor 1MHz DIN53483 0.003 ISO527 97MPa tensile yield dielectric strength VDE0303 190kv / mm ISO527 4.9% yield tensile strain leakage current ultimate tensile strength DIN5340 KC150 ISO527 - adhesive ?? + ultimate tensile strain ISO527> 60% non-toxic and harmless EEC90 / 128 - Impact toughness ISO179 0.B.kJ / m2 friction coefficient DIN53375 0.34 notched impact toughness ISO179 8.2kJ / m2 combustion performance of UL94 V-0 Rockwell hardness of ball pressure law ISO2039-1 M99MPa UV resistance UV ?? 0 Shore D hardness DIN53505 90 ?? + flexural strength acid resistance and alkali resistance ISO178 170MPa ?? + elastic modulus ISO527 3660Mpa carbonated water resistant ?? + Vicat softening temperature ISO306 250 ℃ carbonated water of chlorine-resistant (CKW) ?? 0 ISO75 240 ℃ heat distortion temperature resistant aromatic compounds ?? + Hotline expansion coefficient DIN53752 0.47K-1 * 104 anti-ketogenic thermal conductivity ?? + 20 ℃ DIN52612 0.25w / (mxk) heat water ?? + production status mainly rely on imports. Origin are Germany, the United States, Japan and other places.