Where soil gray PEEK-1000 board

 PEEK-1000 (brownish gray) PEEK-1000 using pure polyether ether ketone resin as a raw material, in all PEEK level best toughness, impact best. PEEK-1000 can use the most convenient way for disinfection sterilization (steam, dry heat, ethanol, and Y-rays), and the manufacture of PEEK-1000 raw ingredients comply with the EU and the US FDA hard and fast rules about food, these features make it suitable for medical , pharmaceutical and food processing industry has been very widely used. Performance parameters experimental nature of the nature of the test standard data standard data density ISO1183 1.32g / cm3 volume resistivity VD0303 4.9 * 1016xcm DIN53495 0.5% water absorption surface resistance VDE0303 ≥1015 chemical resistance ?? - dielectric constant 1MHz DIN53483 3.2 continuous use temperature ?? -40 ~ 260C dielectric loss factor 1MHz DIN53483 0.003 ISO527 97MPa tensile yield dielectric strength VDE0303 190kv / mm ISO527 4.9% yield tensile strain leakage current ultimate tensile strength DIN5340 KC150 ISO527 - adhesive ?? + ultimate tensile strain ISO527> 60% non-toxic and harmless EEC90 / 128 - Impact toughness ISO179 0.B.kJ / m2 friction coefficient DIN53375 0.34 notched impact toughness ISO179 8.2kJ / m2 combustion performance of UL94 V-0 Rockwell hardness of ball pressure law ISO2039-1 M99MPa UV resistance UV ?? 0 Shore D hardness DIN53505 90 ?? + flexural strength acid resistance and alkali resistance ISO178 170MPa ?? + elastic modulus ISO527 3660Mpa carbonated water resistant ?? + Vicat softening temperature ISO306 250 ℃ carbonated water of chlorine-resistant (CKW) ?? 0 ISO75 240 ℃ heat distortion temperature resistant aromatic compounds ?? + Hotline expansion coefficient DIN53752 0.47K-1 * 104 anti-ketogenic thermal conductivity ?? + 20 ℃ DIN52612 0.25w / (mxk) heat water ?? + production status mainly rely on imports. Origin are Germany, the United States, Japan and other places.