Thermostat

For the environment (controller) l Temperature -10 ℃ ~ + 55 ℃ l humidity ≤95% RH, non-condensing, non-corrosive gases altitude ≤2500 m l working principle and function of temperature and humidity controller consists of sensors, controllers, a heater (or fan) inside the three-part sensor detects temperature and humidity information, and transmitted to the controller by the controller analyzing process: when the inside temperature, humidity reaches or exceeds a preset value, controller relay contacts are closed, the heater (or fan) power to work, or to the tank is heated blast and the like; a period of time, the temperature or humidity inside the distance from the set value, the controller relay contact opens , heating or air blowing is stopped. In addition to the basic functions of different types but also with break alarm output, transmitter output, communications, and other auxiliary functions blast forced heating. Technical parameters measuring range temperature -40.0 ℃ ~ + 99.9 ℃ humidity of 20% RH ~ 90% RH Accuracy ± 3 ℃ temperature and humidity ± 5% RH transmitter output DC4-20mA or DC0-20mA heating temperature control parameter setting range -40.0 ℃ ~ + 40.0 ℃ blast cooling 0.0 ℃ ~ + 100.0 ℃ and humidity control 20% RH ~ 90% RH can set the amount of hysteresis 1 ~ 40 (℃ or% RH) output contact capacity 5A / AC250V (passive contact) Auxiliary power Voltage AC 85 ~ 265V DC 100 ~ 350V power base power (≤0.8W) + relay power (per channel ≤0.7W) safety performance frequency withstand voltage power supply and enclosure accessible metal parts / power supply with other terminal group 2kV / 1min (AC, RMS) Insulation resistance ≥100MΩ mean time between failures ≥50000 hour communication interface RS485, MODBUS-RTU protocol Installation Embedded installation Meter shape and installation dimensions in mm HSWK48 dimensions of 48mm * 48mm, depth 85mm HSWK72 dimensions 72mm * 72mm, 97.5mm HSWK96 deep dimensions of 96mm * 96mm, 85mm HSWK46 deep dimensions of 120mm * 60mm, 137.5mm deep selection of intelligent temperature and humidity controller can simultaneously multi-point measurement, multi-point control environment temperature, humidity, HSWK48-11 way temperature and humidity control, 48 square flush mount. HSWK72-11 way temperature and humidity control, 72 square flush mount. HSWK96-11 way temperature and humidity control, 96 square flush mount. HSWK96-22 Road temperature and humidity control, 96 square flush mount. HSWK46-11 way temperature and humidity control, 46 trough embedded installation. HSWK46-22 Road temperature and humidity control, 46 trough embedded installation. HSWK46-33 three-way temperature and humidity control, 46 trough embedded installation. Example Model: HSWK-1W1S Auxiliary Power: AC220V control parameters: temperature: t≤5 ℃, blast: t≥40 ℃, dehumidification: RH≥85% Cable: DS-2 Heater: ALW-200W