Polyester Polypropylene PP _ _ Weifang Weifang Chun Hing waterproof

 3.4 screed junction structures and facades (parapet, chimney, vent, Deformation, skylights, walls, etc.) should be rounded to. 3.5 Gutter longitudinal slope of not less than 5%, the fall-mouth around the drain should be made a little pit bottom. 3.6 801 glue adhesive selection cement mixed with cement mortar . 801 plastic, water, cement volume ratio was 2: 4:10 polypropylene wholesale, first adhesive 801 placed within prepared good container, while stirring with a stirrer, water (water temperature 5 ℃ -50 ℃) polypropylene polyester, water addition was complete After stirring until completely dissolved 801 polypropylene plastic, and then added with stirring cement, finished cement and stir until evenly without clots, no precipitation can be used. Adhesive should be made within four hours spent 3.7.3 screed surface thoroughly cleaned, but cleaning up coil construction site. 3.7.4 Open the membrane, carefully check polypropylene prices, certificates should be retained, at the same time to see whether membrane damage in transit handling process. 3.7.5 Prior to the main waterproof layer construction drawings should be more focused part of good drainage and additional parts of the additional layer . Polyester Polypropylene PP _ _ Weifang Weifang Xing Chun Chun Hing water provided by Weifang waterproof material Limited. Waterproof Materials Co., Ltd. Weifang Chun Hing (www.wfjunxing.com) strong, credible, Shandong Weifang waterproof, moisture-proof material industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the Weifang Chun Hing waterproof and you hand into the brilliant, for a better future!