Polyethylene Polypropylene | PP | Weifang Chun Hing waterproof

 Cleanup grassroots (screed) → Configuration → dry mortar adhesive complex parts (yin and yang angle, cornice, the water inlet pipe holes and other parts) an additional layer of waterproof layer construction → → → protective layer waterproof layer test (with the preparation with the use) construction inspection. Note: Paving waterproofing membrane lap width of not less than 100mm; two floors and two adjacent membrane joints should be staggered junction third magnitude 3.4 screed and facade structures (parapet, chimney, vent, Deformation, skylights wall, etc.) should be rounded to. 3.5 Gutter longitudinal slope of not less than 5% polypropylene, the fall-mouth around the drain should be made a little pit bottom. 3.6 801 glue adhesive selection cement mixed with cement mortar . 801 plastic, water, cement volume ratio was 2: 4:10 polypropylene polyester, rubber 801 into the prepared first container, while stirring with a stirrer, water (water temperature 5 ℃ -50 ℃) polypropylene prices, water addition was complete After stirring until completely dissolved 801 glue, and then added with stirring cement, cement and finished stir until evenly without clots, no precipitation can be used. Adhesive should be made within four hours spent polyethylene fiber | PP | Weifang Xing Chun Chun Hing water provided by Weifang waterproof material Limited. Waterproof Materials Co., Ltd. Weifang Chun Hing (www.wfjunxing.com) strong, credible, Shandong Weifang waterproof, moisture-proof material industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the Weifang Chun Hing waterproof and you hand into the brilliant, for a better future!