Tetracycline dryer | dryer | new energy

 Boiling fluid bed dryer Features ◎ circular structure to avoid dead ends. ◎ the hopper agitation, to avoid agglomeration of raw material and forming channel flow when dry. ◎ The turning dump grain, easily and quickly complete tetracycline dryer can also be designed as request access to material systems. ◎ vacuum sealing operation, the airflow through the filter. Easy to operate, easy to clean. ◎ drying speed, temperature symmetry, each batch of drying time is generally 20 to 30 minutes, depending on the material may be. Boiling drier air distribution plate has two roles, one supporting material layer anhydrous zinc sulfate dryer, two gas distribution. Distribution plate hole size, shape, and distribution of momentum, opening rate and so plays a crucial influence on the distribution of the fluid. Uneven distribution of gas, make the bed a "circulation", it tends to bed extremely easy to make certain parts of a "channeling", while the remaining parts are dead bed, when most of the gas along the bed Some passages in the form of "channeling" short leave through the bed, so that the gas-solid contact much worse, which is supposed to focus on to avoid. Good distribution plate design, should be able to suppress unevenness appear in the bed, i.e., when some parts of the bed due to the pressure drop is low and the gas velocity increases, the resulting resistance distribution plate should suppressing an increase in air flow, thereby inhibiting fluidizing deterioration. Tetracycline dryer | dryer | new energy provided by Changzhou Lake dry Engineering Limited. Tetracycline dryer | dryer | new energy is Changzhou Lake Drying Engineering Co., Ltd. (www.longhudry.com) launched this new upgrade, the above picture is for reference only, please call the contact phone or pictures on this page, For the latest information, contact: Gu Zhidong.