Aluminum rivet aluminum rod, aluminum machining (certified), aluminum welding rod

Aluminum rivet aluminum rod, aluminum machining (certified), aluminum welding rod being provided by the Aluminum Co., Ltd. Jinan Lu. Jinan, Shandong Aluminum Industry Co. positive (www.jnlzly.com) is specialized in the "thickness 0.3-200mm special specifications of various sizes of aluminum, aluminum coil Kaiping cut" of the enterprise, the company adhering to the "honesty, hard service" concept To provide you with the highest quality products and services. Welcome to inquire! Contact: Li Jihua. First, the thickness of aluminum :(: 0.15-280; width: 100-2000): pure aluminum, aluminum alloy, hot-rolled thick aluminum (cut according to user requirements), peritoneal aluminum curtain walls with aluminum base, aluminum veneer, anti- Rust aluminum, painted aluminum, aluminum panels, aluminum wafer; special alloy aluminum radiator fins, molds for aluminum alloy, aluminum plate special, special aluminum cable tray. Cars, boats for aluminum. (Non-calibration foot aluminum according to user requirements). Automotive aluminum quality requirements: 1.1.1 1.1 Appearance quality sheet edge should be cut flush, no glitches, crack edge aluminum rod export offers, does not allow stratification. Within the scope of the strip on both sides of 30mm or 30mm around the plate within the range allowed a variety of non-critical defects. 1.1.2 The plate should be a good surface quality processed and should be flat, smooth aluminum welding aluminum wires electrician, does not allow any cracks, corrosion, wear the vent, crimping, creasing, straightening roll printing, peeling, annealing oil spots and scratch injury, oil, stick injury, prints, loose dendritic pattern, metallic and non-metallic pressed into the matter and other defects. Allow a slight light bar does not affect the use of color and other defects. 1.1.3 requires deep drawing sheet no "rhyolite" and "orange peel" phenomenon after deep drawing. 1.1.4 plate, strip surfaces rub, scratch depth of not more than 0.02mm. Rub scratches per square meter is not more than 2 within, the area of ??each of the abrasion is not more than 100mm × 100mm. Scratch within each 500mm × 500mm range is not more than two, each no longer than 100mm.