Supply of specimens mounted machine

XQ-2B Specimen Mounting Press 
 XQ-2B metallographic specimen mounted machine (hereinafter referred to as embedded machine) is not suitable for surgery, is not easy to get small metallographic specimens of thermosetting plastics suppressed. Can be easily carried out after forming the sample grinding and polishing operation, but also conducive to the metallographic determination of microstructure under the microscope. Mounted machine under the following conditions can be reliably work: 
 1, no more than 1000 meters above sea level; 
 2, the ambient temperature does not exceed +40 degrees Celsius, not the end of the -10 degrees Celsius; 
 3, the air relative humidity less than 85% (at 20 ° C); 
 4, showed no obvious vibration and bumps; 
 5, no lead voltage around the dust, explosive gas, and can seriously damage 
 Metal and insulation corrosive gases. 
 This machine is mechanically mounted machine outside the body rotating hand wheel, bevel gear driven by a pair of screw to suppress the body model in the next sample kit just move up and down mode, heat for plastics, together with test samples mounted like shape in the heating conditions. The forming process of sample preparation fixed in the collective pressure from the spring automatic compensation, the pressure of the sample by the signal suppression give instructions. 

 The embedded machine configuration digital temperature control, enabling real-time temperature display and temperature independent settings, configure the timer, but also to achieve a kind of semi-automatic system, greatly improving efficiency. Sample preparation time for each mosaic 8-10 minutes, get smooth as a mirror of the ideal specimen. 

 1. Sample size suppression ?22 × 15mm; ?30 × 15mm; ?45 × 18mm 
 2. Heater specifications 650W 220V 
 3. Temperature adjustment range 100-180 ℃ 
 4. Controlling supply voltage fluctuations less than ± 15%, 220V, 50Hz 
 5. Dimensions 340X270X400mm 
 6. Net weight 33Kg