Beijing water supply test equipment, test equipment flushing Jiangxi, Jilin, hand-held spray equipment, test equipment, Wuhan flush

Uses: 
 [Standard] series of water testing equipment punching equipment is mainly used for assessing electrical and electronic product shell, seals in the water after the test. During the trial period or whether the equipment and components to ensure good work performance and technical condition. 

 At the same time during transport or use products that may be affected by the intrusion of water, technical standards for products to provide reference basis. Based on natural conditions for the artificial rain experiment carried out, no rain with strong wind, regardless of specimens in high temperature and water temperature, water temperature by the introduction of a large number. 

 First, the technical specifications (to meet IPX5, IPX6 the test) 
 1, the spray diameter: 6.3 mm / 12.5 mm 
 2, spray pressure: 30 ~ 100kpa 
 a), spray angle: Adjustable 
 b), water volume: 12.5 ± 0.625L/min ~ 100 ± 5L/min adjustable 

 Second, the structure 
 Device Description and composition 
 Note: This device by "GB4208-93 enclosure protection class IP Code" in the technical requirements of IP × 5, IP × 6 (the second number 5 and the second characteristic feature number 6) design and manufacturing. 
 BOP test, can be moved to any one place for BOP tests, required by regulation to be a good flow, pressure, time and spray range. Can be tested. 
 Device consists of: 
 Test device from the storage tanks, pressure pumps, transfer valves, flow regulators, water pipes, diversion devices and other components. 
 Tank: thick brushed stainless steel arc welding-type made of high-level. 
 Jet holder: made of stainless steel finishing. Meet GB4208 technical requirements of enclosure protection IP code 

 Third, the hydraulic control system 
 1, pressure regulator with flow meter size 
 2 manually adjustable pressure relief valve 
 3, with a water filter