Stainless Steel Accessories

Stainless steel fittings. Stainless steel fittings. Precise hydraulic balance and improve product support, to ensure safe discharge pressure inside the building rainwater pipe flow, drain quickly, the displacement of large water pipes indoor suspended without slope, the water less vertical space-saving building risers number, location and flexible .. Fukunaga .... siphon water bucket Description: Fukunaga siphon water bucket by: Stamping siphon water bucket chassis, made of high quality 304 stainless steel material. Pressure ring and shroud with a hard aluminum and zinc alloy die-casting. With anti-corrosion, anti-extrusion and other characteristics. Siphon siphon water bucket water bucket with a very strong anti-vortex atlas function well to prevent air flow through the water bucket into the entrance of the entire system, and when the water level before fighting to a certain extent, the formation of a water seal completely blocking air from entering. Smooth and rain flooded bleed into the drains. Siphon water bucket to minimize the water depth gutter, so that the roof load to minimize withstand rain, while improving the water bucket rated flow. Fukunaga siphon water bucket basic installation: ● The music clean siphon water bucket should be set at the lowest point of the roof or gutters, rainwater catchment area for each bucket amount of not less than two. The spacing between the two water bucket does not exceed 20m. Water bucket from the roof edge distance not less than 1m, no rain Pelton [1] atlas to 10m. ● Le Jie siphon water bucket and roof (gutter), and piping system systems should be reliable connection. ● When the system to access multiple siphon water bucket, water bucket drain connection pipe connected to the hangers should not be directly connected to the top of the riser rain. ● access to the same suspension tube siphon water bucket should elevation in the same roof. ● gutter depth starting point should be based on the catchment area of ??the roof, the front slope and siphon water bucket bucket depth OK. Gutter slope of not less than 0.003. ● To note shall be left in the water bucket debris, filling or packaging materials, clear sealant flows into short tube, and then install other components, in order to avoid congestion. For more information, please visit the official website: http: //www.rainwaterchina.com