Low-foam metal parts cleaning, degreasing steel, copper alloys and other metal parts cleaning GLS-501

 GLS-501 low-foam metal parts cleaning agent 1. Introduction This product is a low-foaming water-based cleaning agent, it is a combination of surface active agents, penetrating and auxiliaries is made with penetration, emulsification, dispersion peeling function. Dedicated to the production process clean machining process metal parts and development of oil, grease and dirt mixed with excellent cleaning effect. 2 Features 2.1 economy: the case of concentrated products, low dilution use, low average cleaning cost. 2.2 Efficiency: degreasing effect, fast. 2.3 Compatibility: For most non-corrosive metal material security. 2.4 Applicability: low-foam especially for spray cleaning machine, ultrasonic cleaning machine is also suitable. 2.5 Environmental protection: phosphate-free, the choice of surfactant can be biodegradable, environmentally safe. 3, the basic purpose: 3.1 for carbon steel, alloy steel degreasing, steel, aluminum and aluminum alloys and other materials to clean metal parts. 3.2 can be applied to the surface of metal parts copper and copper alloys and other materials residual process oil, grease, cleaning. 4, to determine the process parameters of the composition according to the dirt, dirt remaining amount, cleanliness, cleaning methods, drying methods, and online test temperature is determined using the ratio of cleaning time and other parameters. Recommendations are as follows: temperature: between 30 ℃ -70 ℃ adjustments; concentration: 5% -8% of the proportion of water for dilution. Time: Between 0.5-5min adjustment. 5, use 5.1 manual cleaning: GLS-501 after dilution soaking manual brushing. After washing rinsing, then press into the production process requirements after the procedure. 5.2 Ultrasonic cleaning: GLS-501 will be determined by the proportion of added ultrasonic cleaning machine after cleaning process requirements by the end of the transfer after the procedure. 5.3 Spray cleaning: GLS-501 will be determined by the proportion of added spray cleaning machine after cleaning process requirements by the end of the transfer after the procedure. 5.4 cleaning requirements in a short time, such as rust and recommended the company's ES-215 water-based rust inhibitor supporting the use of better, for the long-term anti-rust recommended the company's ES series of anti-rust oil. 6 Note 6.1 product is alkaline, not in direct contact with the skin, such as a splash into the eyes, please wash with water. 6.2 in cold storage areas and below freezing may cause the product to freeze or thicken, but the performance is the same. 6.3 storage, if sediment precipitation, does not affect product performance, stir before use. 7, packing 200kg / barrel, 25kg / barrel plastic pail 24 sales QQ: 1619742185 Sales Hotline: 18973729850