Shell S2 Zhongshan Huangpu Town HTF HTF _ _ Shell HTF S2

Shell HTF Jiangmen, Foshan, Zhongshan, Jiangmen total distribution of the total distribution of Shell Shell HTF HTF S2 S2 (formerly: Shell Thermia B HTF) Shell Heat Transfer Oil S2 Shell HTF S2 is selected by a highly refined high viscosity solvent index mineral oil blending together, in the oil body temperature up to 320 ℃ indirect closed heat guide system still outstanding. Recommended Applications Shell Thermia B can be used in the use of mineral lubricating liquid sealed heat conduction system. Performance characteristics of high thermal conductivity; - has good thermal stability, can effectively prevent carbon deposition; * Good oxidation stability, extended oil life; * Good viscosity-temperature performance; · low vapor pressure, low volatility; * non-corrosive, non-toxic. Shell Oil Heat S2 (formerly: Shell Thermia B Heat oil) Shell Heat Transfer Oil S2 heat transfer oil Kaiping, Taishan, Xinhui, Jiangmen total distribution of Shell Oil Heat S2 is selected by a highly solvent refined high viscosity index mineral oil blending, closed loop thermal systems for industrial applications, such as processing plants, chemical plants, textile mills, as well as household appliances, such as heaters and other oil heater. Shell HTF S2 can be used for continuous high temperature heat exchanger device, the application limits are as follows: maximum film temperature of 340 ° C, the maximum oil temperature of 320 ° C. Zhongshan Shell heat transfer oil supplier, is intended to improve the reliability and enhance the protection of Shell heat transfer oil with a high degree of solubility, reducing the formation of thermal oil deposits provide excellent protection for the system. Meanwhile Shell HTF Heat S2, carefully selected refined mineral oil can prevent oil cracking, oxidation and thickens, helping to extend lubricant life and provide efficient fluid heating, to ensure a good cycle Zhongshan HTF general distribution, so that the film surface temperature of the heater is always below the maximum limit. Shell heat transfer oil vapor pressure lower Heat TransferS2, to prevent cracking, which reduces the formation of volatile decomposition products of the maximum, thus improving the efficiency of the system.