Sky licensing mechanism charcoal mechanism _ _ mechanism charcoal charcoal equipment supplier

How to determine the quality of charcoal production mechanism charcoal equipment, it depends on the charcoal burning time, burning charcoal longer marks the better the quality. Only resistant to burning charcoal will receive welcomed by the market. In environmental protection mechanisms charcoal equipment, even high-quality charcoal production processing equipment ah charcoal burning time will be long segments. Then factor charcoal burning time are what it? Which mechanism charcoal. In fact, the production of charcoal burning charcoal equipment time with raw materials and charcoal extent determined by two factors, the higher the carbon content of charcoal, heat is generally greater, not only large amount of heat in the combustion, also called charcoal and air contact surface area to be small in order to extend the burn time. Here refers to the pore surface portion of the outer surface of the material and the interior. Improve charcoal burning time: 1, charcoal equipment to improve production line system of rods forming pressure, increasing the density and strength of the rods. Mechanism charcoal suppliers. 2, by increasing the kiln final carbonization temperature, and slow down the heating, cooling speed, so that out of the finished high-density, high hardness. 4.11 environmental protection mechanisms charcoal equipment is the main equipment to produce charcoal, charcoal production and charcoal waste material can be used, not only to solve the problem of waste material, re-use, but also to ease the high demand for charcoal in the market. Charcoal in actual use, some time because it will result in a low yield rods charring. The main reason is that in the process of charcoal carbonization caused by too much oxygen. 1. Improper ignition position: the ignition position is too close to oxygen hole in oxygen hole (kiln door) produce fire, resulting in a large number of charcoal kiln door at the phenomenon. To solve this problem is to correct the ignition position, the ignition position so close to the central body of the kiln. 2, raised temperature process too long: sometimes may be due to staff negligence charcoal kiln close time, which led to the raised temperature for too long, wasting some good already carbonized charcoal. Mechanism charcoal factory. 3, kiln flue nowhere: automatic mechanism charcoal equipment will inevitably lead to a prolongation of the flue nowhere carbonization time, so that it is bound to burn some of the multi-charcoal, so when loaded kiln must ensure that the chimney flue open . Even we in the pre-purchased a high-quality mechanism charcoal equipment, but if improper operation will have an impact on the life of environmental protection mechanisms charcoal equipment post production. So how can we extend the life of charcoal mechanism it? Professional mechanism charcoal factory Gongyi City blue sky Machinery Plant believes charcoal after long hours of work during the operation must be carried out overhaul of its motor pulley to see if you want to add oil, the need to clean up the dirt and the like; mechanism charcoal suppliers. Sometimes mechanism charcoal equipment after a long work, it will cause the belt loose, then charcoal reduces a lot of speed, long working hours do not increase yields is this reason, it is necessary to do a good job of belt tension Check. Check the motor working time, whether there is a big load for a long time with a load of work, it will damage the motor, thus affecting the efficiency of the machine. Which mechanism charcoal. 4.11