Blue sky machinery has been certified and most professional straw straw charcoal charcoal factory

About Sky brand straw charcoal burning charcoal production equipment length of time, which is related to the raw material and the degree of charcoal, charcoal higher carbon content, the greater the heat, also requested charcoal in contact with air during combustion area, combustion area is small in order to extend the time. How much straw charcoal. Straw charcoal charcoal equipment to improve burn time: 1 to improve the system of rods forming pressure to raise the rod density and strength. 2, by increasing the kiln final carbonization temperature, and slow down the heating, cooling speed, so that out of the finished high-density, high hardness. Straw charcoal production line. 4.15 Automatic straw charcoal equipment for a variety of press-forming raw biomass material and less energy consumption, production efficiency is high. In addition, after the head of the axis of the straw charcoal equipment repair work is completed, be careful of storage, to avoid stub by the collision, the impact on production of charcoal equipment. Blue Sky brand new energy-saving and efficient R & D compared to the old-fashioned straw straw charcoal equipment charcoal equipment mainly has the following advantages: 1, the movement to change the old-fashioned three bearings four, increasing the machine's stability and durability. 2, change the old-fashioned painted oil lubrication oil lubrication as long as no oil, can be used for many years. 3, increase the pitch increased fluxes, resulting in improved yields. 4, to improve the structure forming tube, reducing friction machinery and raw materials, increasing the density of mandrel. For stub charcoal equipment repair work must be timely to avoid affecting the normal operation of charcoal equipment. Most professional straw charcoal manufacturers. 4.16 at the latest straw straw mechanism charcoal equipment forming on the water, there are strict requirements for portion control, how much water is directly related to the success of charcoal making. The correct way to use a raw material grip and release the clutch, to observe the sawdust is spread out, if all together adhesion legend humidity exceeds 12%, is unfit for charcoal, because the water is too unfavorable for molding, charcoal surface will crack. Automatic straw charcoal equipment in proper grasp straw outside the control of the water on the furnace temperature carbonization charcoal equipment also guarantee the achievement of a high carbon content and smoke-protection mechanism charcoal production process within a reasonable temperature range and quality. Straw charcoal prices.