GBX3S type surface tension meter

GBX 3S-type surface tension meter Origin: France Instrument Description: 1) powerful software: 3S surface tension tester provides two levels of software, basic software for beginners, advanced software for specialists. You can get the test program and test parameters can not be provided by other manufacturers equipment. 2) cast aluminum side gallery: unique aluminum side gallery for solid surface tension tester to ensure good test stability and security. At present, only 3S-type surface tension tester providing means this feature. 3) glass and plexiglass window: surface tension tester Many are based resin window, 3S surface tension tester may choose to use a resin window and the window glass, thus avoiding the danger of some gas or liquid resin erosion. 4) Video and Imaging: 3S surface tension tester can be easily converted into ILMS type (Table interface integrated test system), you can add a video camera to record the video and imaging process rather than just ASCII data. Many other surface tension tester are used to record data via the curve table, worse than the recorded images and video. 5) The humidity and solvent Builder: GBX company 3S surface tension tester provides a built-in stand-alone humidity or solvent generator can save laboratory space. 6) interface visualization: Under normal circumstances, the use of liquid temperature control by double side aluminum sheath, so the interface is unobservable. The 3S-R & D-type surface tension tester is using a special design, beaker using a loop to control the temperature, it can easily observe liquid interface. 7) Temperature control: the liquid temperature can be controlled by a cold room, Peltier effect or electric wire. 8) Network Control: 3S surface tension tester can be controlled (optional) through full network. Technical parameters: 1) The contact angle accuracy: +/- 0.1 ° or 0.01 ° or 0.001 ° depending on weight sensors have different measuring accuracy; 2) test Repeatability: +/- 0.1 °; 3) contact angle range: 0 - 180 °; 4) interfacial tension range: 0.005 - 2000 mN / m (dependent on the sensor of choice); 5) the maximum recording speed: 50/60 frames / sec (STD value, other speed depends on the application); 6) Scaling : x10 and x20; 7) sample table size: 100mm x 100 mm; 8) syringe Type: borate glass and plastic; 9) Needle type: 10 kinds of different doses of needles used for different ST values ??were applied to different oil and different viscosities; 10) Maximum sample size: Thickness: 130 mm - Depth: 150 mm - Length: more than 150mm; if the test sample long robotic arm will need to be placed in the background behind the light, the other sample sizes needed provide customized services according to the actual situation; 11) sample beaker (container): a diameter of 70 mm, 50 mm, 20 mm borate glass beaker to choose from; 12) Temperature control: -20 ° C to 200 ° C (use Peltier effect or resistance wire two heating methods optional); 13) generates humidity range: 0% - 99%; 14) Humidity analytical range: 5% - 95%; 15) Temperature Sensor range: - 50 ° C - 500 ° C (instead of using the same sensor); 16) power supply: 90V - 230V; 17) Frequency: 50 Hz- 60 Hz;