Console manufacturers

Console requirements (1) require a total of 10 dispatch seats, two seats in a group, each seat support two monitors 22 inches, a total of bearing support 18 16:10 22 inches of display devices, display after display arm suspension On the console back, the back wall height of 320mm, the back wall with aluminum structure, surface wear EFI after treatment, anti-static, there are easy to monitor arms hanging groove. (2) provided inside each seat accommodating host computer can host trays, keyboard, mouse, monitor through KVM Extender device connected to the host machine room, configured to facilitate the demolition of partitions, easy to place the KVM Extender devices. (3) the need to provide a total PDU power console 8 6 3 hole. (4) every three seats a message interfaces, flip-up mode, the interface includes 2 phones, 2 network, a VGA, 1 x 3.5 audio interface, 2 power connector, a microphone port. (5) the length of each group of seats ≥6 meters. Mesa requirements: surface coating should be used with heat resistance, burning smoke, impact-resistant, resistant to moisture, waterproof, corrosion-resistant high-pressure high-strength wear-resistant plate (HPL), the rear panel has adequate support in order to ensure lateral stability . Panel part of a monolithic structure, each part with the whole structure should be integrity. Console control panel should be removable without the need for any tools. (1) The mesa structure console console table is divided into two parts, the size of the panel. Small panel and back walls, large panel slot reserved not less than 10mm, easy to qualify from the bottom of the main frame to the table. Small panel for the front access panel, using wood particle board dual posts imported fire board processing, the overall thickness of not less than 20mm, connected by a plastic snap connection with the body frame. Its front-mounted stainless steel pop-up button, easy to remove a small access panel Great wood particle board panels use double quote imported fire board processing, the overall thickness of not less than 27mm, open arrow slot between two large panels, the use of not less than 100mm long, not less than 6mm thick connecting rod ends, the connection must be flat and smooth seamless whole. (2) large panel edge technology large contact area with the body before the end of not less than 30mm wide use of flexible polyurethane duck lips curved edge banding to ensure that the operator working arm natural and comfortable. Use the rear end face not less than 6mm thick flexible polyurethane Edge, higher than the overall table 8mm After installation, pens and other stationery to prevent slipping. Wood particle board formaldehyde emission panels, door panels, cabinet products used must comply with the national standard (required formal testing organizations test reports issued) console product structure, appearance, and a variety of materials applications bidding companies must have independent knowledge property, are required to provide the relevant patent (3) Face and panel table countertops: Interior is 1 "; (25 mm) composite panels, surface high pressure HPL table edge: the periphery of the flexible polyurethane casting formed, a width not. :( front of the device is less than 30mm of 18mm internal wood particle board), the surface of the high-pressure HPL, you must use a hinge to simplify the installation Face Width: 450 mm -800 mm; surface to surface distance is:.. 720-750 mm, bottom adjustment foot height can be adjusted; worksurface support arm: standard material strength of not less than 10 cold-rolled steel; reinforcing bar strength standard of not less than 12 cold-rolled steel bottom support: bending stress of not less than 110 KSI HPL overlay: nominal. thickness: 1.2 mm; thickness error: ± 0.12mm or less (including the number); abrasion resistance: not less than 400 cycles.