Woodpecker diatom mud diatom mud _ _ Woodpecker Paint Industry Group Co., Ltd.

Woodpecker ecological diatom mud walls Arts trim interior trim is a natural environmentally friendly type DIY wall decoration materials, the main ingredient diatomaceous earth, powdery appearance. Celite activated charcoal to more than 5,000 to 6,000 times the hole, which has a strong adsorption capacity. Features: natural environmental green ecology clean air to breathe freely adjust the temperature and humidity decomposition gas lasting beautiful soft colors of fire retardant acoustic noise insulation fire retardant arts craftsmen shape lasting thousands of negative ions cast new bridge construction Notes: 1. In order to ensure the best coating results, use the woodpecker's primers and topcoats supporting construction. 2. Be sure to read the packaging before using the word in the construction instructions carefully, in order to obtain reliable and satisfactory coating effect. 3. If it gets in the eyes, rinse immediately with plenty of water, and seek medical help. 4 in the construction process, careful not to use air conditioning, fans or windows open for ventilation. Drying too quickly, increasing the difficulty of construction texture. 5. stirring products, please note that the use of masks, protective glasses and other protective supplies. 6 construction process to avoid strong wind blowing straight and direct sunlight to dry naturally appropriate. 7. This product is a water-soluble decorative materials can not be used directly affected by the flooding shower areas, namely kitchen room is not available. 8. The physical properties include natural raw materials there are some differences in color is normal and does not affect product quality. 9. Do not eat diatom mud, avoid entering the eye. 10. The children keep a safe distance from storage, the strengthening of environmental health protection during use. 11. Ecological diatom mud as interior decoration materials, can not be used outdoors. 12. Brushing sealer drying only after the diatom mud construction. 13. Press the recommended amount of water in the stirring vessel was 90% water, then poured a bucket of inorganic pigments and a bag of diatom mud, soak for about 10 minutes, stir with a stirrer, while the remaining 10% of the water with adjustment to a suitable viscosity takes place. After adjusting the amount of water to be fixed in order to ensure uniform color after construction diatom mud. 14. Apply the product twice completed the first pass of about 1 mm thickness, or until the surface no obvious amidst hand pressure applied during the second pass sticky, thickness of the second pass of about 1.5 mm. According to the second pass of the effects of different texture slightly different thickness. 15. When making a textured effect, depending on the texture and effects, time and slightly different shape, texture effects detailed construction instructions or contact company personnel. 16. diatom mud to dry for 24 hours after use, do not touch the surface before diatom mud is dry.