Days MELS multimedia presentation matrix switcher matrix switching system TS-AV7200

Product description:? TS-AV7200 is a 7-input 2 independent outputs, based on a modular design that supports a variety of analog and digital signal inputs and outputs demonstrates a combination of matrix switcher. Support brightness, contrast, saturation, hue sharpness, balance, gain and other adjustments. Support unbalanced stereo audio input and output and the amplifier output. Mainly used in broadcast television engineering, multimedia conference room, large-screen display engineering, multimedia classroom, command and control centers and other occasions. Product features modular design of the card? The card with high-density module structure design, separate buffered interface and connector combination of expansion and maintenance convenience, saving system cost. Flexible composite application? Supports any input card, output card combination with, depending on demand. Rich signal type? Offers seven kinds of input signal selection, available in four output signal selection. Automatic switching function? When the system detects an input source, can automatically identify the image signal, and the signal is switched to the output channel, is sent to the display device. Amplifier output? Integrated commercial-grade 12V, 12.5W class AB amplifier is connected to the small power amplifier provides high quality stereo audio output channels. Volume Control? The front panel provides a digital dial, you can adjust the volume of the main audio and amplifier. Convenient keypad? Front panel control buttons, knobs, controls and menu options for easy selection switch and adjust. EDID function? Support EDID field read and write capabilities and call the system default EDID function. A variety of ways to control? 1 Ethernet interface provides network control, 2-way RS-232 DB9 interface provides control and 1 4pin Phoenix seat provides RS-485 signal. Fold line function? For lower resolution screen, automatic fold line and digital signals to analog converter. Technical Data Type TS-AV7200 DP input support agreement displayport V1.1a, HDCP1.3, EDID1.4 bandwidth of 7.5Gbps support a maximum resolution of Normal PC 1600x1200 @ 60Hz_24bit color depth HDTV 1920x1080P @ 60Hz_24bit color depth signal type displayportV1.1a specification Digital Differential signal HDMI / DVI input support agreements HDMI V1.3a, DVI V1.0, HDCP V1.3 supports a maximum resolution bandwidth of 6.75Gbps Normal PC 1600x1200 @ 60Hz_24bit color depth HDTV 1920x1080P @ 60Hz_24bit color depth signal type (HDMI V1 .3a / DVI V1.0) specification HDMI / DVI-D digital TMDS signal VGA input signal type RGBHV, RGBS, RGsB, RsGsBs bandwidth of 400MHz @ -3dB supports a maximum resolution Normal PC 1600x1200 @ 60Hz_24bit color depth HDTV 1920x1080P @ 60Hz_24bit color depth Y / C input bandwidth of 250MHz @ -3dB. Signal type component video (Y / C) standard NTSC, PAL, SECAM YUV input bandwidth of 250MHz @ -3dB. Signal type component video (YPbPr / YCbCr) standard NTSC, PAL, SECAM Interface RCA female connector RF signal input operating frequency 5.8GHz standard R & TTE & FCC transmission distance of 300 feet video signal input signal type composite video (CVBS) video bandwidth of 480MHz standard NTSC, PAL switching speeds up to 100ns stereo audio input signal type (unbalanced audio) frequency response of 20Hz ~ 20kHz signal to noise ratio (S / N)> 80dB HDMI / DVI output supports protocol HDMI V1.3a, DVI V1.0 , HDCP V1.3, EDID V1.4 supports a maximum resolution bandwidth of 6.75Gbps Normal PC 1600x1200 @ 60Hz_24bit color depth HDTV 1920x1080P @ 60Hz_24bit Deep Color signal type HDMI V1.3a / DVI V1.0 specification HDMI / DVI-D full TMDS signal digital output signal type RGBHV VGA bandwidth of 380MHz @ -3dB. It supports a maximum resolution Normal PC 1600x1200 @ 60Hz_24bit color depth HDTV 1920x1080P @ 60Hz_24bit color depth stereo audio output signal type (non-flush audio) input impedance:> 10 kΩ (balanced / unbalanced connection) Output: 50 Ω (unbalanced connection French) maximum output level + 19.5dBu, (balanced / unbalanced connection) gain error ± 0.1dB @ 20 Hz ~ 20 kHz linear output card output connector 2-way 3.81mm / 5pin Phoenix connector / per channel unbalanced audio output amplifier Output Interface 1 channel output card Phoenix connector 4pin / power output: 12.5W & 4Ω frequency response 20 Hz ~ 20 kHz THD + Noise 0.05% @ 1 kHz (nominal voltage) signal to noise ratio (S / N)> 58dB stereo separation of> 80dB @ 1 kHz common mode rejection ratio (CMRR)> 75dB @: 20 Hz ~ 20 kHz port control Ethernet Control Interface RJ-45 female connector (optional accessory control interface) Ethernet control rate 10M or 100M, full-duplex or half-duplex serial control interface RS-232, 9- pin female D-type connector Baud rate and protocol baud rate: 9600, data bits: 8, Stop bit: no parity Serial Control Structure 2 = TX, 3 = RX, 5 = GND Certification CE, ROHS power supply 1.5A / 90-230VAC matrix transmission system, due to the mixing matrix may be the card function, convenient for customers to use, more and more customers of all ages .