ASHLY / Yashi Ni 3.6SP3 into six digital speaker processor 3.6SP authentic licensed

Yashi Ni 3.6SP Processor: 3 input / 6-output digital signal processor capable of precise and extensive control audio functions through specific function buttons on the front panel interface allows quick to send all control parameters. eliminate hidden submenu. 2x20 backlit LCD display channel characteristics and feature set. Relevant specific button to access all audio functions and system tools. More efficient and powerful set of visual input / output routing, EQ, filtering curve system, two USB ports (one on the front panel and one in the rear) and RS-232 interface can be used Ashly control software (Protea Software) and PC connectivity. A six-foot USB-A to USB-B cable. The advantages of using software is that it includes a very powerful preset capabilities, and audio routing and control process is very intuitive. Protea 3.6SP uses advanced DSP technology, from 24 bit, 48kHz of delta-sigma A / D converter with 128 times oversampling. Digital processing includes: gain, polarity switching, parametric equalizer, scaffolding filter, time delay, crossover functions, compression, limiting and signal routing, all processing by a pair of high-performance DSP processor 120MHz. D / A converters use 24 delta-sigma converter with 128 times oversampling. All inputs and outputs are use to prevent RF interference balanced XLR connector. Each input allows you to control gain, delay and six filters (each of the parameters of your choice, high or low scaffolding). In addition to setting the crossover frequency, each input can be assigned to any one or a set of output, you can set the four parameters, high or low scaffolding filter, delay adjustment, output gain, polarity and compressor / limiter for speaker protection. All of this in a rack space with XLR XLR input and output interfaces. 3.6SP can store up to 30 presets. Preset file to take a "snapshot" of all current control mode completely stored data for all channels, Protea 3.6SP similar to older models Ashly Protea 3.24CL / CL-d. * File .PCC old format files can be loaded as a preset to use a new 3.6SP. In short, Protea 3.6SP is a powerful, easy operation of the processor. Whether performing live or for fixed installation, provides accurate audio processing capabilities and superior sound. Performance features: Input: Active balanced, 18K ohms Maximum input level: + 20dBu input gain range: -40dB to + 12dB output: active balanced type, 100 ohms maximum input level: + 20dBu input gain range: -40dB to + 12dB Distortion: <0.01 @ 1KHz, + 20dBu dynamic range:> 110dB 20Hz - 20KHz unweighted noise output: <-90dBu EQ filter unweighted number of segments: 6-band parametric input, output 4-band parametric parameters: 1 / 64Th octave to 4 octaves range: + 15 / -30dB, 0.1dB added frequency response: 1 / 24th octave Weight: 13 lbs Dimensions: 19 "Wx3.5" Hx8.2 "D