Rui Feng amplifier LAXCX500

Product parameters: CX500 1kHz (EIA) with0.5% THD 8Ω stereo (per channel) 2 × 500W 4Ω stereo (per channel) 2 × 750W 8Ω bridged mono 1500W Frequency Response (1W) 20Hz-20kHz, + 0 / -1dB total harmonic distortion (THD) <0.5%, 20Hz-20kHz intermodulation distortion (IMD) 60Hz and 7kHz at 4: 1 from full rated output to -30dB ≤0.35% conversion rate> 10V / us Voltage Gain 33dB 200 damping ratio (at rated output power of reference, 20Hz-20kHz, A-weighted)> 100dB Crosstalk (at rated output power reference) at 1kHz: -75dB / at 20kHz: -58dB input sensitivity (rated power 8Ω) 0.775V or 1.4V input impedance (nominal) balanced / unbalanced 20k Ω / 10k Ω input connectors per channel one balanced XLR and an unbalanced RCA input connectors (speaker connector) per channel 4-POLE Speakon and a pair of wiring column on the front panel control buttons power switch, channel gain control knob control buttons output mode switch: stereo, parallel, bridged; input sensitivity switch: -0.775V or 1.4V all the way to the blue LED power indicator LEDs per channel, all the way to the green signal LED clip indicator for each channel all the way to the yellow fault indicator LED per channel all the way to a red LED, showing the channel off the power cord plug Specifications: 10A, 250V wire: 3 × 1.5mm3 protection against short circuit, empty wear, on / off noise, radio interference protection circuit by the air ventilation convection cooling mechanism of strong internal air travel after row of cooling, fan cooling, quick adjustment, temperature protection Dimensions (H × W × D) 482 × 88 × 227mm Weight 13.5kg Product parameters: CX500 1kHz (EIA) with0 .5% THD 8Ω stereo (per channel) 2 × 500W 4Ω stereo (per channel) 2 × 750W 8Ω bridged mono 1500W Frequency Response (1W) 20Hz-20kHz, + 0 / -1dB total harmonic distortion ( THD) <0.5%, 20Hz-20kHz intermodulation distortion (IMD) 60Hz and 7kHz at 4: 1 from full rated output to -30dB ≤0.35% conversion rate> 10V / us 200 voltage gain of 33dB damping ratio (at rated output power of reference, 20Hz-20kHz, A-weighted)> 100dB Crosstalk (at rated output power reference) at 1kHz: -75dB / at 20kHz: -58dB input sensitivity (rated power 8Ω) 0.775V or 1.4V input impedance (rated ) balanced / unbalanced 20k Ω / 10k Ω input connectors per channel one balanced XLR and an unbalanced RCA input connectors (speaker connector) per channel 4-POLE Speakon and a pair of terminal control buttons on the front panel power switch, channel After the gain control knob control buttons output mode switch: stereo, parallel, bridged; input sensitivity switch: -0.775V or 1.4V power indicator blue LED signal lights all the way all the way to the green LED per channel Clip LED per channel all the way yellow LED fault indicator of each channel along a red LED, showing the channel off the power cord plug Specifications: 10A, 250V wire: 3 × 1.5mm3 protection against short circuit, empty wear, on / off noise, radio interference protection circuit ventilation air travel after the convection strong emission mechanism for cooling the interior air cooling, fan cooling, quick adjustment, temperature protection Dimensions (H × W × D) 482 × 88 × 227mm Weight 13.5kg