High temperature wood Fungicides

Product description Suction anti rainwater runoff type timber Fungicide Fungicide within TF80 wood species, can rapidly form a pale white emulsion in water, which polymer active ingredient can spread rapidly penetrate into the wood fibers tissue. Not only to prevent the wood internally generated blue stain, mildew can tag the wood surface, the product of a variety of Aspergillus, Trichoderma and Penicillium have a strong role in the killing, to prevent the growth of blue stain fungi have a demonstrable effect, bamboo, wood Ideal fungicide, especially for rubber wood, Pinus sylvestris, larch, birch, maple and other species prone to mildew preventive. TF80 with high stability, high temperature resistance, less impact on the environment, ecology and anti-mildew treatment and low cost, is the first choice for the majority of wood processing enterprises mildew products. Blue did not just cut and dry high moisture wet rubber wood, Pinus sylvestris, larch, birch, maple and so easy to mold special species can effectively prevent cocodimethyl globisporus (B0try0dlpl0dia theobromae Pat.) Caused by mildew spot phenomenon. TF80 wood Fungicides by SGS testing, post-mildew treatment of wood products in line with EU environmental directives. Proper use of TF80 wood fungicide treated wood, wood can not rot, no insects, not termite damage. Widely used in poles, ocean timber, sleepers, cooling tower components, wood piles, fences, terraces and outdoor wood / bamboo products and anti-corrosion function processing. Specifications ※ Appearance: milky white latex ※ total active ingredients: Alkyl amine compound (Ammoniacal Copper) and (Chlorothalonil CTL) mixture; ※ active ingredient content: to 1.09-1.15g / L at a temperature of 20 ℃ ※: 70% ※ proportion Freezing point: -5 ℃, if there is icing, can be used normally after thawing. Use 1: vacuum pressure method is recommended to use a concentration of 1% to 1.5%, according to China's wood structure construction quality acceptance (GB502060-2002) regulations. Keeping the amount of treated wood preservative active ingredient mold by vacuum pressure method should be 4kg / m3 or higher. 2: immersion method is recommended to use a concentration of 3% -5%, soak time of 10-20 minutes. 3: brushing method is recommended to use a concentration of 6% -8%, brushing the area of ??30-35 sq / kg; when sprayed with, go to the outdoor ventilation operation, a spray used at a concentration of 7% -9%, the spray area 35 -45 sq. / kg. Used dry standing: the treated wood As shaded environment for at least 4 hours, dropping its excess products can be recycled. Drying: The wood placed in shelter and well-ventilated place to dry naturally, the normal time is 24-48 hours. Storage: dried timber should be placed in a cool, dry storage. Use: Before working use, make sure the wood humidity should comply with standard, it can be the glue, paste, paint and other decorative processes. Note 1: The agent for fish and shellfish affected, not arbitrarily Dumping attention after use. 2: You must bring rubber gloves, protective glass, masks and other protective equipment, pay attention to the impact on the human body. 3: stick to the skin should be promptly wash with soap and water, hit the eye immediately with plenty of clean running water. 4: Please go to the outdoor ventilation operation using a sprayer spray. 5: TF80 treated wood should not be used for food packaging.