TGF Wood Flame

Product description TGF wood flame retardant halogen-free environmentally friendly flame retardants and heavy metals and other contraband components, the product is liquid, miscible with water, flame retardant, smoke suppression, anti-corrosion and anti-termite properties. This non-toxic and tasteless, after dealing with small wood moisture, does not emit toxic gases when burned, can achieve B1 level of national requirements. Specifications ※ Appearance: No transparent liquid ※ PH value: 7-7.50 ※ Weight: 20 ℃ temperature of 1.12-1.20g / L ※ freezing point: -5 ℃, if there is icing, can be used normally after thawing. The ratio of treatment solution preparation TGF wood flame and water is generally 1: 2-1: 3 (recommended greater than 1: 3), for the more difficult soaking or high density wood is recommended to use a higher concentration of the flame retardant treatment solution. 1. Use a vacuum pressure impregnation: Before vacuum time is 30-45 minutes, most of the time is 30-45 minutes pressurized timber, pressure 1.2mPa. Few pine wood as the infusion time is 2-2.5 hours, the pressure is 1.4mpa, impregnated depth of 8-10 mm, up to the national level BI requirements. 2. Soak Remedy: wood placed against the thin wood flame retardant bath soak, soak time of 8-10 hours at atmospheric pressure, infusion of about 5 mm depth. 3. The process should be repeated brushing brushing three times more than the amount absorbed 0.3 kg / square meter. There are certain flame retardant properties.