Foshan furniture production machinery bottom slot machines

Whether to provide custom processing: Yes Brand: Granville source of woodworking machinery model: MX1450 Type: Woodworking milling forms of work: Manual Product Type: new power rating: 3 (kw) Dimensions: approximately 2400X800X1000 (mm) Max Length: 1150 (mm ) Feeding speed: 18,000 rev / min Scope: furniture manufacturing and wood products rated voltage:. 380V accommodate a range and technical parameters: shank diameter: 6.3-12.7MM, table size about: 1450X600MM, stroke: 1150MM, Spindle speed approximately: 18,000 rev / min, motor power: 3KW, power supply: 380V, Dimensions approximately:. 2400X800X1000MM quality assurance, credit management! (Another possible that the price depending on the need to change the 220V household electricity or motor power.) (A) occurs mainly woodworking machinery accident because of the following four areas: 1. woodworking machinery working knife shaft speed is high rotational inertia, difficult to brake. The operator in order to make it as soon as possible after the motor has stopped stopped, often customary hand or stick to brake, often inadvertently make hand contact with the rotating blade and cause injury. 2. woodworking machinery more use of hand-feeding, which is lurking hand injury reasons. When pressed wood hand feeding, since the encounter knots, bending or other defects, not consciously hand injuries caused by the contact with the edge. 3. woodworking machinery, high speed, coupled with uneven wood being processed, large cutting process noise, vibration, high labor intensity, fatigue. These factors are likely to enable the operator to generate errors and cause injury. The operator is not familiar with the safe operation of woodworking machinery performance and technology, or not in accordance with safety procedures work, plus woodworking machinery and equipment without security guards or security guards failed to install, they are very vulnerable to injury. . (B) measures to prevent accidents woodworking machinery mainly in the following five areas: 1. All kinds of woodworking machinery and equipment shall be provided with effective brakes, security guards and cleaning chip devices. 2. woodworking machinery and equipment in use, make sure there are no harmful vibration when using any tool at any cutting speed to avoid danger during operation. 3. Where exposed belt drive, wheel, shaft, etc., should have a protective cover. The arbor and electrical interlocks should be, so as not to dismantle and replace the tool, inadvertently leaving the power button tool rotation, causing injury. 5. Where the local conditions, for all the woodworking machinery shall be fitted with an automatic feeding device.