Bridge steel formwork manufacturers in which

Bridge formwork used in the construction process of the bridge, with particular attention to the quality of the installation process, as this large building bridges must attach great importance in terms of quality, can not be taken lightly. Bridge formwork in which the installation should meet the technical requirements, technical personnel Weizhi template today to tell you. 1, Bridge formwork and scaffolding in addition to the overall design when you can join, and scaffolds other times do not join, so as not to cause deformation of the bridge template. Installation template and steel to complement each other, if the template hinder steel strapping, you must install reinforced during the installation template; 2, to the side template, the installation process to avoid depressed position and a convex bridge template appears. Pouring in concrete rod, should not pull out or pull rod in accordance with the requirements, to take certain measures; 3, Bridge formwork installation process must be done to prevent the dumping of structural measures, to be stable after the installation check to ensure entire template stable and reliable structure, can pouring of concrete pouring process template found deviations must be promptly corrected. 4, note prestressed, arch and lower self and other gravity and load factors flexible, best to set the necessary pre-camber and flex. In addition to the above four points, there are other bridges template when installed to meet the requirements, would like to know, please visit our website www.gywzmb.com