Dongguan assembly yellow plastic manufacturer

Introduction of the enterprise and the leading US business after several years of joint research by several companies involved in the use, the effect is significant characteristics to the advanced level of technology, acceptance by users. The product is a fast curing, poly vinyl acetate emulsion adhesive with good heat resistance, solvent resistance and high strength adhesive force, and has good water resistance, moisture performance, due to its curing rate at a 45-minute early dry, hard, it is one for a wide range of wood bond. Appearance: light yellow liquid Viscosity: 50000-55000mpa.s solid content: 55 +/- 2% protective colloid: polyvinyl alcohol pH: 3-5 Tutorial: suitable for furniture, woodworking mortise, assembly, wood splice, order fire Board edging and other parts of the quick bonding. 1, bonding wood moisture content: 7-12%. 2, the uniformity of the coating layer does not exceed ± 0.15mm error. 3, was stuck in the adhesive material should be pressurized, the pressure should be adjusted according to different materials, low-density material 6-10kg / cm2, a high-density material 12-18 kg / cm2. 4, pressing time from 30 minutes to 2 hours, depending can be adjusted according to the ambient temperature. 5, the adhesive material should be placed only be machined after 24 hours of health. 6, operate in environments of more than 50C. Applications: This adhesive is a high solid content, fast adhesive, general furniture, woodworking tenon, styrofoam plates, veneers, wood tiles, stone, decorative paper, leather, linen, paper, etc. are suitable. Features: 1, a certain heat resistance, resistant to moisture, water, solvent 2, good adhesion, fast curing (summer: 30-60 minutes, Winter: 50-90 minutes) initial tack is very high. 3, high content, high film toughness, bond strength. 4, can be used in cold and hot pressing process. Storage properties: sealed and stored at room temperature is valid for six months. Packaging: 20 kg / barrel 50 kg / barrel 220 kg / barrel