Digital electronic salinometer detection Lucai soup food salt salty sea water meter salinity meter farming

Salty soup kitchen a healthy test pen [Function] probe: test salt concentrations. 7 red LED indicate salt concentration: 0.3% - 0.6% (moderate); 0.8% to 1.0% (conc.); 1.3% to 2.0% (too strong), the corresponding parameters are only reference to the role of personal taste different Please try to make their own determination. A green LED for power indication. ON button: Press the button and hold power can be tested. After releasing the test was stopped. [Instructions] check salt test meter probe is clean, not clean with mild detergent and clean. The test was placed in a container, and the need to have a certain height. Press the ON switch salt tester, see Power light is green, if not bright, said battery voltage is low, the battery should be replaced. The probe is inserted into the test meter salt solution at least 2CM, and tested from the vessel wall at least 1CM distances to be displayed after stabilization read out the most has been the brightest red on one reading, compared with the detected value. After testing, the salt test meter probe part with a mild detergent cleaned [Performance Specifications] Power input: 4 × 1.5 = 6V LR44 × 4 Working current: MAX 20mA (LED full brightness) Dimensions: 212 × 24.8 × 15.4 (mm) Weight: about 36 g measurement range: 0.3% to 2.0% Temperature range: 60 ℃ ~ 80 ℃ formula: salt content = total mass × concentration Example: If the total mass of a solution of 1 cup 150g, concentration to 0.5% 150g × 0 5% = 0.75g quantity:. 100PCS Carton Size: 37.5 * 31 * 57.5CM GW: 9.5KG NW: 8KG [Maintenance] [clean] please rinse with water or with a cloth glue in probe part detergent to clean the machine do not rinse with water or with a cloth glue neutral detergent to clean the main part of this machine Do not use alcohol, probe and body portions thinner and gasoline to clean the machine. [Storage] to prevent falling or strong, otherwise it will lead to the salt concentration of the test meter failure. Keep away from heat, direct sunlight, humidity and other places. If not using the salt concentration of the test time, remove the batteries.