Qingdao rubber mats, Jinan Miki maps, Shandong rubber mats

1. Compression and cooling after kneading the plastic material to be pressed into a certain thickness of the film in order to cooling, management and use. Tabletting can either increase the cooling area for cooling, and easy stacking management and use. The extruded film requires immediate dip isolation agent solution and freeze-drying hair, is the film to reduce the temperature at 40 ° c, before stacking park to prevent burning rubber and bonding between film. 2. consider demanding plastic airtight plastic materials, such as rubber mats, rubber staircase or rubber tire tube, etc. must be filtered to get rid of one of the mechanical impurities. The method is to use nose and mouth was equipped with a multi-layer steel mesh screw extruder, so that rubber extrusion through the screen. Antistatic marine rubber flooring, generally used in 30m and 60m filter a layer of special plastic material can be used 40m and 80m filter compartment floor. 3. After parking the film cooling and drying must be stacked in the prescribed manner in order to use standing for at least 8 hours. So that the rubber stress relaxation, reduce shrinkage during subsequent processing, also can make the complexing agent can continue to spread in the rubber compound to improve the degree of mixing, but also help to continue the role of the interface between the rubber and carbon black, and further improve reinforcing effect. But the parking time to do more, no more than 36 hours. Domestic rubber flooring market analysis market analysis 1. Production capacity: Compared with foreign products, domestic rubber flooring is all produced according to customer requirements. 2. Quality Price: The domestic and foreign quality rubber flooring rubber flooring comparable quality. 3. The market share: According to market research, 25% of the domestic rubber flooring industry, rubber floor flooring industry occupies 1 ‰. So rubber flooring flooring industry development potential is very large.