Low-temperature hot-melt adhesives, hot melt adhesive film low temperature, low temperature hot melt adhesive Po in Hong Kong, Hong Kong-low temperature, low ..

Low temperature hot-melt adhesives, hot melt adhesives scientific name Po in Hong Kong; commonly known as low-temperature hot melt adhesive Po, low temperature hot melt adhesive film, cold Hong Kong Po. Low temperature hot melt adhesive is the main component of TPU liner before the most advanced, after the sleeve material is a new type of shoe quality materials. Low temperature hot melt adhesive advantages: having rubber elasticity and plasticity of the thermoplastic material; repeated use sticky unchanged; the characteristics of their products are also heated and softened after tack. Operating temperature is very low, suitable opening hours, and the characteristics of the high bond strength. Shoe plastic appearance, easy to shape deformation, and excellent resilience, good weather resistance abrasion resistance, materials green. Stereotypes when no creases, water chestnut, reduce product defect rate on a variety of materials have good adhesion, no adhesive coating. Saving energy, a very excellent maneuverability. Low temperature hot melt adhesive Specification: 0.4mm ~ 1.5mm thickness have brown, white, water, cyan (blue) of three colors, there are coils and sheets available in two sizes. Range 0.4mm ± 0.05mm thickness specifications applicable general Light men's, women's, children's shoes and casual shoes 0.6mm ± 0.05mm general lightweight men's, women's, children's shoes and casual shoes, men's lightweight 0.8mm ± 0.05mm general , women's, children's shoes and casual shoes 1.0mm ± 0.05mm light casual shoes, men's, women's, children's shoes and boots 1.2mm ± 0.05mm men, women, boots, hiking shoes and special purpose shoes 1.5mm ± 0.05mm men, women, boots, hiking shoes and special purpose shoes, finding ways: according to the direction indicated by the product (ie, the horizontal direction) cutting. Cutting edge ways; using conventional shaving machine is, if necessary, add oil or (water) drip edge at the way in cutting edge machines. Forming way: material bonded interface temperature of 80 ~ 100 ℃; the activation temperature is 75 ~ 90 ℃ If hot / cold rear sleeve setting machine, set the hot mold temperature of 105 ~ 120 ℃, for 15 to 20 seconds. (temperature and time to be set according to the change of the face material and the inner lining material adjustment); If the last Californian law, temperature-side molding line heating activation system shall be set 100 ~ 105 ℃, held for 5 minutes. Low temperature hot melt adhesive Application: Suitable for all high-grade leather shoes, boots, shoes, children's shoes, work shoes and all kinds of sports shoes. Before applying hot melt adhesive film, for toe and heel shaping effect, make the shoes look no deformation, to achieve the aesthetic effect of low temperature hot melt adhesive is Chan Sheng Wenzhou shoe production of quality products;. Quality assurance, price concessions. The company also production and supply of Hong Kong-hot-melt adhesives, hot melt adhesive (Baotou plastic), folding glue (hot melt adhesive tablets), before and after the help of plastic, chemical film, rubber, Lai Sun cloth, cross pattern Canberra, latex sponges, long-fiber reinforced fabric (eyelet lining) and other shoe Welcome customers to negotiate procurement. This information is provided by the Wenzhou Chan Sheng Shoes network, reproduced, please indicate the source: Chan Cheng Wenzhou Shoes network or www.wzcsxc.com.