Supply HMPSA, hot melt block, pressure-sensitive, hot end of plastic, pressure-sensitive blocks, shoes ..

Pressure sensitive adhesives, hot melt adhesives, also known as block, yellow transparent, has a strong bonding, it can be used to bond the composite common Velcro, foam, plastic, adhesive composite paper and non-woven fabrics and other materials. Quality Standard: Appearance: yellow transparent shaped elastic solid Solid content: 100% Softening point: 83 ± 5 ℃ melt viscosity (160 ℃) / m Pa.s: 4000cps purity: heating to 180 ℃, 200 mesh screen full by Tack; 6 # Ball (French bowls) Holding power: ≥26 construction process 35h 180 ℃ peel strength / (N / 2.5cm): 1. Recommended glue method: spray or rubber roller 2. Operating temperature 155-165 ℃ 3. Plastic boxes or hose if carbon, can use an ordinary paraffin or mineral oil to clean, then rinse hot melt adhesive at about 120 ℃ 4. Adhesive consistency on this product can be adjusted by temperature. Security matters: 1. Hot melt adhesive thermal operations such as hot melt adhesive to the slot when feeding, should wear heat-resistant gloves and protective eye 2. Use spaces should be well ventilated and banned all open flames storage and transport: Store in a cool, dry place away from direct sunlight, storage temperature should be below 35 ℃ and away from fire and heat source. 1 year shelf life, according to non-dangerous goods transport. Packaging: The product 20KG carton packaging, approximately 0.5 kg / block. Note: The above information is for reference only, it is recommended before using this product to test suitability. The Company does not undertake any for any loss due to operational errors caused by improper use of Wenzhou Chan Sheng Shoes Co., Ltd. Main: low temperature hot melt adhesive film, hot melt adhesive Po, hot-melt adhesives (Baotou plastic), hot melt adhesive stick, folding plastic (hot melt adhesive tablets), to help the former rubber (former state plastic), after helping gum (gum after state), pressure-sensitive adhesive (hot melt adhesive block), chemical sheet (Baotou Wang), leather bran paper back of the plastic, Lai Sun cloth (Lixin Brazzaville), the base fabric, latex sponge, reinforcing tape, long-fiber reinforced fabric (eyelet lining) and other shoe. Welcome customers to cooperate! This information is provided by the Wenzhou Chan Sheng Shoes network, reproduced, please indicate the source: Chan Cheng Wenzhou Shoes network or www.wzcsxc.com.