Long cab, cab, Jinan Yiu Cheung

 You do not know in the course of the cab using Prince have not encountered this situation:? Prince cab chassis checks have oil spills, leaking face is how to deal with this situation, you check it tire pressure, tread wear condition, without loosening the nut. If the driver feels there is the phenomenon of deviation or to fight malaria, to go to the pits wheel alignment or balancing check. Check the fan belt for damage or broken, adjust the belt tightness. Check the connection of the entire vehicle wiring harness, wireless skin cracking, loose, poor contact and so on. Note Do not replace coolant water temperatures gradually rise, and some friends found insufficient coolant tank , on random supplemented with water. Then car antifreeze is not the subject, but easy to produce water alkaline water, rusty water and low boiling point, is very likely to 'boil' and therefore can not arbitrarily replace the coolant water. At the same time change Incidentally check whether the left and right sides of the coolant drain holes are blocked, so after it rains, poor drainage cab lights, intrusion into the car. should be careful to check the oil drain color is normal and without foreign body, in order to find fault risks regularly inspect cab cab diagram, to detect potential failures before they occur, but also to make you a better understanding of the habits of the car, which was tuned to the best. heavy truck cab production line built in After that there is a capacity to improve the process, the general could not immediately reach the preset capacity. Additional, heavy truck cab for coating requirements of course has grown, but so far there are still gaps and car coatings. About 50% to 70% of the control room still thinks fit coating process using the two (ie, the coating process is omitted). Because of this, according to three preset coating default in the previous stage, when you can start in the coating line and related to the release of all located in the second phase of construction. When doing a stage production of the cab, three coating process can be implemented to start painting painted by hand in the paint segment. And then return to finish baking in the coating chamber spray paint spray paint. A period can not lose focus set in paint coating systems and air conditioning systems, when the second phase in the coating line until then these devices filled. Machinery Industry fourth pre-hospital as Shaanxi Auto heavy truck pre-coating line with a capacity of 20 / h. Thinking problems to reach the previous stage pre-production, so set aside the coated wire is not started. Today, Shaanxi Auto heavy truck production and sales increase, without affecting the status of things produced in the coating line will start to complete. Long cab, cab, Jinan Yiu Cheung Yiu Cheung is provided by Jinan Trading Company. Jinan Yiu Cheung Trading Company (www.jinanyaoxiang.com) strong, credible, in Jinan, Shandong's engine assembly industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving Jinan Yao innovative ideas will lead you hand into the brilliant harmony for a better future!