Anhui plastic glass stone ceramic-metal Medicine UV glue

Anhui glass, plastic, stone, metal, ceramics, medical category UV gluing Material Type: Glass electronic components leather plastic rubber-based fiber stone type metal timber class other materials Medicine ceramic cement products other light cured acrylic sheet acrylate adhesive, the product is durability, medium viscosity Visible / UV cure adhesive. Suitable for bonding between the glass and metal features: one-component package, easy to use; available ultraviolet light or sunlight curing, curing speed, and has the following characteristics: optical properties: crystal transparent glue, after curing light transmission rate> 90%, similar to the glass refraction factor. Adhesive properties: volume shrinkage after curing, elongation, high bonding strength. Weather resistance: good weather, after prolonged exposure to ultraviolet light non-yellowing, can be used in a temperature range of -20 ℃ -80 ℃. Uses: widely used in: production, fixed, bonding and assembly of glass furniture, glass products, crystal products, photo souvenirs, watches, jewelry, advertising, optoelectronics products, plastic products and other products. Usage: first sticky surface to be cleaned clean, dry, drop a small amount of glue to be sticky, compacted surface layer air bubble inside, with a high pressure mercury lamp (power 300w) at 10cm from the light irradiation for 15 seconds, or direct sunlight by about 25 seconds can be cured (but with different light transmissive material and fixtures, the curing time is about differences), 24 hours after the performance of the best groups of plastic. Note: This product has a mild irritation to the skin, when used to avoid direct skin contact and inhalation of vapors, to prevent eye drops, wash with soap and water after use.