MP3 camera MP3 player, built-in camera support photo camera recording versatility 00 ..

P3 HD cameras | HD camera MP3 | MP3-definition video camera MP3 Camera: Features 1, video features: VGA video recording AVI format, 640X480 resolution, video, audio synchronization; recommend player: wind and thunder audio and video, Storm video, kmplayer, Mplayer, etc. multi-format supported media player. 2, the camera features: 300 million pixels (1280x1024), JPEG format. 3, MP3 function: Support MP3, WMA, WAV and other file formats 4, U disk function: support large capacity storage from 1GB to 8GB ... Standard USB2.0 interface, no driver (except WINDOWS98). 5. PC camera function: support PC camera function, can do video conferencing; 6, economical and practical: Built-in lithium battery, no external power supply, standard DV-5V charger or computer USB charging (plug and charge). 1, start: In the off state (light body), the power switch appropriated NO position toggle key, press the play button, long yellow light, after booting the machine into standby mode. 2, MP3 player :( Note: Make sure U disk MP3 songs stored in the MP3 folder). In standby mode, press the play button will start playing MP3 songs, press ▼ to move to the next song, press the ▼ to increase the volume; short press ▲ key to enter the song, long press ▲ volume decreases; MP3 players the state, short press the play button to pause playback, press the play button again to continue playing, the machine is in MP3 loop; press the play button to shut down; in MP3 playback, MP3 player to exit briefly press the record button, the program Return standby (yellow lights lit) (Note: In the pause state can not quit playing MP3 MP3 playback). 3. Video: In standby mode, short press video button into the video, when the indicator is off, blue lights that are the video; short press video button again to save the video to return to the idle state; time recorders 30 minutes per recording device will automatically save the file once and continue recording. 4, camera: In standby mode, press the camera button, yellow, blue lights flashing alternately once a successful photo shoot and save. 5, display time adjustment: the machine recording, playback video files on your computer, you can display the time, the steps are as follows video ①, into the computer, in the root directory of U disk, create a file named time.txt, file Content and Format: 2009-08-08 20:08:08 (such as the current time: August 8, 2009 20:08:08), save the file in the root directory of U disk from the computer after the security exit ( Note: The file content and format does not have any differences). Updated Tool 2.0 or more convenient. ②, re-start recording and save, when you save the audio file to play on your computer, upper left corner of the video synchronization time displayed. 6. PC camera function: the power switch toggle button toggle NO position, even with removable USB disk, press the play button switch 10S PC camera function can be used after the blue light and so on. (Note: The first time you use the PC camera function, insert the CD into the drive, long press the play button to blue light and follow the prompts to install PC Camera.) 7, off: In standby mode, press the play button, the LED full off, complete shutdown will be ON / OFF button to the OFF position to save power. In the camera mode, press the play button shutdown, the system will automatically save the current video file. Note:. A In order to save electricity, in the standby mode, without any operation for about three minutes, the system will automatically shut down. b. When are recording, if power is low at this time, the machine will first save the video content and then automatically shut down. c. continuous recording time of more than half an hour, will be automatically saved once, and then continue recording. d. Each time recording, every start and stop the video recording cycle of operation, the system will generate a new video file. . e. Save the file will take some time, do not perform other operations in the light from blue to red in the process, such as: press the switch to connect computers and other; this will lead to just-recorded video files can not be successfully saved, may lead to generate a file is incomplete, lost, crashes and so on. f. After the disk is full, the indicator back to standby mode, press the record button blue light after light 3S return to standby unable video. Press the camera button yellow, flashing blue light has been staggered. g. there is adequate lighting in the environment, keep the machine upright and stable, scenery and being proactive to maintain the 50cm